Wanted: Tailstock for Atlas/Craftsman 12" L4-5

[bhusted]

Looking for a tailstock for a Atlas/Craftsman 12" lathe. I think the casting should show L4-5. This is for a model #101.27430

 

[wa5cab]

You will also need (if you don't already have it) a 10D-6 Base. The base also fits the 10" Atlas.

 

[bhusted]

Unfortunatly I need the entire assembly. The lathe I picked up for $150 didn't come with any of it.

 

[wa5cab]

OK. That's why I mentioned the 10D-6. On eBay, they are often listed separately.

 

[ARC-170]

Is this what you need:




Everything works, it just needs paint. The handle isn't pretty, but it's not bent. The rust is just surface rust. Shipping for this is probably around $80, maybe less. Let me know.

 

[bhusted]

Thanks for your help. I actually found a complete one on another site for sale recently and have already put it to good use. My lathe is nearly complete again!

 

[ARC-170]

Good! I had a feeling it might be too late, but thought I'd offer anyway. Enjoy your machine!