WANTED [USA/Oregon] parts for proLIGHT lathe/mill (Intelitek/Light Machines)

crazybrit

Registered
Registered
Joined
Nov 28, 2018
Messages
34
Hello. I'm looking for the following original parts. Pictures attached.

No disrespect intended but I'm not looking for advice on how to make or adapt equivalents.

Intelitek/Light Machines proLIGHT 3000 CNC lathe (Turning Center).
- Collet closer
- Tailstock
- Turret tooling plate
- Blue control box (just empty box, don't need knobs, display or electronics).

Intelitek/Light Machines proLIGHT 1000/2000 CNC mill
- R8 spindle housing
- Tool changers

I'd also be interested in buying a second lathe/mill if it has some of the above parts. These machines were sold mostly to Technical Schools and Colleges and quite often get released as surplus. Within a 6 hour one way drive of Portland, Oregon.

If you have anything or know of someone who does I'd greatly appreciate a PM (click here).

Thank you for your time.
 

Attachments

  • closer1.jpg
    closer1.jpg
    151.2 KB · Views: 122
  • closer2.JPG
    closer2.JPG
    94.2 KB · Views: 111
  • tooling_plate1.jpg
    tooling_plate1.jpg
    835.7 KB · Views: 133
  • tooling_plate2.jpg
    tooling_plate2.jpg
    979 KB · Views: 124
  • tailstock3.jpg
    tailstock3.jpg
    144.5 KB · Views: 110
  • tailstock.jpg
    tailstock.jpg
    223.6 KB · Views: 122
  • Prolight spindle.jpg
    Prolight spindle.jpg
    65 KB · Views: 112
  • control box.jpg
    control box.jpg
    49.9 KB · Views: 117
Last edited:
Back
Top