Warco lathe oil which one

koikidder

Registered
Registered
Joined
May 2, 2018
Messages
7
i have a warco gh1322 lathe and i want to change the oil in the headstock and gearbox cannot see any in the gearbox sightglass so not sure if its empty or filled over the sight glass as it dirty

it says shell tellus 32 but im unable to get this people are saying hydraulic iso 32 oil any thoughts

i have attached the data sheet does not even say about the headstock

oil.jpg
 
Yes ISO 32 hydraulic oil is the equivalent.
 
ISO 32 is available at any tractor dealer and at a good parts store. It is a very common oil used in heavy equipment hydraulic systems. I can buy it at my local NAPA in either one gallon jugs or five gallon buckets.
 
ISO 32 is available at any tractor dealer and at a good parts store. It is a very common oil used in heavy equipment hydraulic systems. I can buy it at my local NAPA in either one gallon jugs or five gallon buckets.
yeah got some bought should receive it by end of the week cheaper for me to buy in 20ltr £28.95
 
Back
Top