Will Craftsman 109 Change Gears Work On An Atlas H48?

MDof2

Registered
Registered
Joined
Mar 14, 2016
Messages
14
Can't find any reference if they will.... or will not.....
Any help would be appreciated.
 
No. Definitely not. The Craftsman lathes with model numbers beginning with 109 are either 6X18's or 6x12's (and were not made by Atlas). I have seen it written more than once that the AA or Dunlop t" lathe's change gears can be used on the various Atlas built 6" machines but they are different from the gears used on the Atlas built 10" and 12". Smaller bore and finer (higher DP) gear teeth.
 
Back
Top