- Joined
- Sep 10, 2013
- Messages
- 562
Hi All
I’m putting the finishing touches on my House DIY 2x72 grinder, and I seem not be able to find NEMA 56C motor looked at a Baldor VM3558 2hp but it is not rated VFD. So I’m not sure exactly sure what the motor specs should be. I would rather not have to spend $1000.00 on a grinder motor that is only used lightly in the shop. I wont’t be running it 24/7 365 if you know what I mean. The plans don’t spec the motor other than NEMA 56C case mounting for the plate.
any advice is greatly appreciate.
Thank
CH
I’m putting the finishing touches on my House DIY 2x72 grinder, and I seem not be able to find NEMA 56C motor looked at a Baldor VM3558 2hp but it is not rated VFD. So I’m not sure exactly sure what the motor specs should be. I would rather not have to spend $1000.00 on a grinder motor that is only used lightly in the shop. I wont’t be running it 24/7 365 if you know what I mean. The plans don’t spec the motor other than NEMA 56C case mounting for the plate.
any advice is greatly appreciate.
Thank
CH