- Joined
- Nov 22, 2010
- Messages
- 371
Grizzly unit for my Mill seems quite OVERPRICED anyone installed another brand on a G0619 ???
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
X axis power feed source for grizzly G0619
- Thread starter joebiplane
- Start date
- Joined
- Mar 15, 2019
- Messages
- 708
I picked up an import off ebay and saved a few hundred bucks. $123 vs $525 from Grizzly. Really can't see it being any different than what Grizzly offers other than labeling.
Mine was on a knee mill though so the mill/drill option may be a lot more money. But you may be able to make it work if you have it on a stand and have room under the right hand side of the table. I had to do significant machining to make it mount up and all work but it was totally worth it.
Mine was on a knee mill though so the mill/drill option may be a lot more money. But you may be able to make it work if you have it on a stand and have room under the right hand side of the table. I had to do significant machining to make it mount up and all work but it was totally worth it.