they didnt even send a cd with the kit?
great you got the easy breakout board you can follow the video and wire the board to each driver. leave enough of the shield lead ( bare wire ) on one end to mount to the enclosure to ground. dont worry about the limits and estop at this time
I need to know:
the new shielded wire colors
the motor wire colors
do you have an ohm meter?
steve
great you got the easy breakout board you can follow the video and wire the board to each driver. leave enough of the shield lead ( bare wire ) on one end to mount to the enclosure to ground. dont worry about the limits and estop at this time
I need to know:
the new shielded wire colors
the motor wire colors
do you have an ohm meter?
steve
motor wires if the same colors as your motor wiring diagram below for 4 wire motor are :
motor A ( black ) is A+ on controller (black coming out of shielded cable)
motor B (green ) is A- on controller (green " " )
motor C (red ) is B+ on controller (red " " )
motor D (blue) is B- on controller ( white coming out is the blue now )
leave plenty shield wire to ground one end inside enclosure to case
any guestions so far for motor to controller?
steve