Zert oiler

Thanks Jack, I have seen the Bridgeport German ones I'm sure they work fine ,
May end up going that route if I can't get the gun to work , but I think I can , :cool:
 
Hi all, finally unburied my torch and brazed up the end where the rod and air hole was ,put way oil in it and no leeks , works to good , had oil coming out of my mill knee ways from top to bottom . I figured ied flush them out real good with fresh oil. I was pulling the wipers off and squirting oil down them .:)
IMG_0785.JPG
The nozzle articulates by pulling the sleeve back . Of corse I hold it upside down,So far no leeks.
 
Back
Top