[Documentation] Zip-cut Vertical Mill - My First Mill + Resto (lots Of Pictures)

Aaaannnd we have success finally! With the help of Mark S. and a wiring diagram he posted I was able to get this thing all wired up correctly for 115v and fwd/rev.

Correct motor wiring
StartrandRunwindingsstandard-1.jpg

Here is my post from the troubleshooting thread:
I have wired the switch according to the split phase, split capacitor, capacitor start diagram in post #3. Hot from the wall connects to L1 and neutral is connected to L2 in the motor. Then L2 is brought to the switch via the blue 16 gauge wire on L2.
IMG_20170108_223605.jpg
IMG_20170108_232233.jpg

Drum switch wiring
IMG_20170108_232253.jpg IMG_20170108_232302.jpg

All done!!
IMG_20170109_002540.jpg

Contact!
IMG_20170109_002559.jpg
 
Back
Top