Help.
I purchased a replacement motor from Graingers for my band saw refurbish.
1947 Delta 14" band saw gets a new power plant.
The old motor has a 1/2" shaft with a flat for the allen bolt to mount.
The new motor has a 5/8" shaft with a key way.
Should I bore out the pulley?
Can I buy one that fits?
What would you do?
Thank you for your help.
Jeff
![IMG_1037.JPG IMG_1037.JPG](https://www.hobby-machinist.com/data/attachments/232/232321-4a860cd661ae802e37cd65701a3a43f5.jpg)
![IMG_1040.JPG IMG_1040.JPG](https://www.hobby-machinist.com/data/attachments/232/232322-6095e01e9e5213595af71b2d47f814de.jpg)
![IMG_1047.JPG IMG_1047.JPG](https://www.hobby-machinist.com/data/attachments/232/232323-10bc5dc9a450063d22f5eb273063352d.jpg)
I purchased a replacement motor from Graingers for my band saw refurbish.
1947 Delta 14" band saw gets a new power plant.
The old motor has a 1/2" shaft with a flat for the allen bolt to mount.
The new motor has a 5/8" shaft with a key way.
Should I bore out the pulley?
Can I buy one that fits?
What would you do?
Thank you for your help.
Jeff
![IMG_1037.JPG IMG_1037.JPG](https://www.hobby-machinist.com/data/attachments/232/232321-4a860cd661ae802e37cd65701a3a43f5.jpg)
![IMG_1040.JPG IMG_1040.JPG](https://www.hobby-machinist.com/data/attachments/232/232322-6095e01e9e5213595af71b2d47f814de.jpg)
![IMG_1047.JPG IMG_1047.JPG](https://www.hobby-machinist.com/data/attachments/232/232323-10bc5dc9a450063d22f5eb273063352d.jpg)