Hope this is a good place to post this, I have a Illinois Tool Works dial indicator that is 3 inch in diameter with 1" of travel and reads out 1/10,000 of in inch. I bought this used 42 years ago and cannot imagine going on without it, but here is the problem. The face dial is brass and was originally silk screened white and silk screened with red numbers and notched marks. The paint has been failing for some years now and cracking off and is getting to the point I need to have it fixed by someone with the skill to do it right or it will no longer be usable, any suggestions as to how to proceed would be greatly appreciated. Thanks.