- Joined
- Dec 16, 2014
- Messages
- 85
Hello - So, I am in the midst of refurbishing my South Bend 9A, and had a question on wiring in switches for the VFD I am going to install. I purchased a 1HP Teco (JNEV-101-H1) to mate to a 3/4 HP Leeson 3PH motor.
My question relates to wiring up a control box. I want to tuck the VFD away and control FWD, REV, Pot, and potentially an E-Stop in a small control box.
One thing that is not clear is what Amperage or Volts are passing through the control wiring. I am guessing its low voltage and amperage but wanted to check here. Thoughts?
Also any links to suppliers or products you all have used succesefully would be nice. Thanks,
sbx
My question relates to wiring up a control box. I want to tuck the VFD away and control FWD, REV, Pot, and potentially an E-Stop in a small control box.
One thing that is not clear is what Amperage or Volts are passing through the control wiring. I am guessing its low voltage and amperage but wanted to check here. Thoughts?
Also any links to suppliers or products you all have used succesefully would be nice. Thanks,
sbx