- Joined
- Jul 6, 2019
- Messages
- 3
I need a 10' straightedge that I can use to determine that a concrete floor is within spec for laying porcelain tile, that is, it is flat to within 1/8 inch over 10' when measuring from the high spots:
“the maximum allowable variation is no more than 1/8” in 10’ (3 mm in 3 m) and no more than 1/16” in 2’ (1.6 mm in 0.6 m) from the required plane, when measured from the high points in the surface.”
I'm based in Reston, Virginia, USA. Of course, I'll be willing to pay for your services. This is something I'll need to have within 2 weeks.
Thanks!
Stephen
“the maximum allowable variation is no more than 1/8” in 10’ (3 mm in 3 m) and no more than 1/16” in 2’ (1.6 mm in 0.6 m) from the required plane, when measured from the high points in the surface.”
I'm based in Reston, Virginia, USA. Of course, I'll be willing to pay for your services. This is something I'll need to have within 2 weeks.
Thanks!
Stephen