- Joined
- Nov 8, 2011
- Messages
- 1,678
Not much machining here except for the button on the tip. I used my radius turner for that.
It's a piece that's going in an old sedan delivery, George from http://www.v-edge.com/ will paint it really cool. He does amazing work & all with just one eye.
Couldn't weld on the tank so had to rivet the fins on. Tank is cast aluminum about 1/2" thick tig was shocking my buddy that tried tigging them on.
It's a piece that's going in an old sedan delivery, George from http://www.v-edge.com/ will paint it really cool. He does amazing work & all with just one eye.
Couldn't weld on the tank so had to rivet the fins on. Tank is cast aluminum about 1/2" thick tig was shocking my buddy that tried tigging them on.