- Joined
- Jun 6, 2014
- Messages
- 183
I MADE A THING!!!!!!
Okay, now that I am done with my macaroni plate moment.... let me show you all the macaroni plate I made:
It is a fly cutter made from a 3" long piece of 1.25" diameter 12L14. The tool slot is cut at 20 degrees and will accept up to a 3/8 inch tool. Below is a picture of the stock being turned down in my lathe, pa picture of the milling setup ( I forgot to take a picture with the piece still in the vise) and finally a picture of it chucked up in the mill.
As a hint to anyone else who is ill supplied and finds them needing to protect their piece of round stock from the V groove in a vise, I simply wrapped the shank in a piece of tin foil I stole from the kitchen and tightened down. It did a remarkable job of protecting the turned surface.
Okay, now that I am done with my macaroni plate moment.... let me show you all the macaroni plate I made:
It is a fly cutter made from a 3" long piece of 1.25" diameter 12L14. The tool slot is cut at 20 degrees and will accept up to a 3/8 inch tool. Below is a picture of the stock being turned down in my lathe, pa picture of the milling setup ( I forgot to take a picture with the piece still in the vise) and finally a picture of it chucked up in the mill.
As a hint to anyone else who is ill supplied and finds them needing to protect their piece of round stock from the V groove in a vise, I simply wrapped the shank in a piece of tin foil I stole from the kitchen and tightened down. It did a remarkable job of protecting the turned surface.