- Joined
- Nov 21, 2023
- Messages
- 53
The slots do go through,I thought about emery strips also but I've never seen a tool like this.If the slots in the ends are thru, they could be used with emery strips for for "honing"/polishing IDs.
Likely shop made, I've done the same with a piece of aluminum round held in the tailstock chuck.The slots do go through,I thought about emery strips also but I've never seen a tool like this.
Split rod, works good. 1“ wide sand paper strip doubled over, (longer than bore to be honed) and inserted centered in split.Bought about twenty drill bits mostly #2MT and a few #1MT today,mixed in were two #1MT tools that I can't identify.
Any insights to what they are or do?