5c collets

[jwmay]

Always looking for Atlas attachments for the 10F. Specifically a 3AT drawbar and/or taper attachment parts. But Atlas made a bucketload of attachments. Maybe you have something I don’t know I want.

 

[twhite]

I made my own collet attachments for my SB9. I made 2 so I have a spare setup if you are interested. I made mine for the standard 3C. The draw tube is long so it can be adjusted to fit your lathe. The only thing you need to do is cut the taper in the collet adapter. If you mark the location prior to removing it. You will have a very close to dead true setup. As it is custom cut to your lathe.

3C collets are very easy to purchase compared to 3AT.

Food for thought

I don’t have a good picture but here it is.

Cutting oil is my blood.

 

[jwmay]

I think that’s exactly what I’m looking for. I’ll send you a PM to exchange addresses. Thanks!