- Joined
- Feb 21, 2022
- Messages
- 844
This is the first 3 station self compensating fixture module. There will be various widths and apertures, some dedicated and some using inserts. The modules fix together with M8 socket cap head screws & located in both directions with crossed keys. The range will eventually have blank modules ready to machine to the client spec. I'll post more images as I go along.
The hex top parts will be clamped using the single grub screw on the face which will be torqued to 20Nm and the parts tested with a torque wrench and socket to see when they move. I'll make a video of the test.
This is a 100mm square module, I have some part made 50mm 2 station modules with different size apertures. All types will accept broad toleranced parts & will still clamp parts within a 0.25mm - 0.010" range with the single screw. All the modules are the same depth and an infinite number can be clamped together.
The hex top parts will be clamped using the single grub screw on the face which will be torqued to 20Nm and the parts tested with a torque wrench and socket to see when they move. I'll make a video of the test.
This is a 100mm square module, I have some part made 50mm 2 station modules with different size apertures. All types will accept broad toleranced parts & will still clamp parts within a 0.25mm - 0.010" range with the single screw. All the modules are the same depth and an infinite number can be clamped together.