- Joined
- Jul 20, 2014
- Messages
- 1,386
I don't have a lathe yet and would like a small tool made if someone has the time.
It's a spring loaded scribing tool for a mill. It's from Lautards MBSR. Used to follow a scribed part
by chucking this spring loaded "point" in a collet. Fairly simple design.
It looks and works like a Tapping centering tool but smaller.
Please PM and I can furnish all the drawings, materials, etc...
7" long. 1/2" OD
It's a spring loaded scribing tool for a mill. It's from Lautards MBSR. Used to follow a scribed part
by chucking this spring loaded "point" in a collet. Fairly simple design.
It looks and works like a Tapping centering tool but smaller.
Please PM and I can furnish all the drawings, materials, etc...
7" long. 1/2" OD