- Joined
- Jan 30, 2017
- Messages
- 261
I figured I would try the air. I will pump some Marvel oil in the zerks first, then hit them with air.
-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Removing grease from oil channels
- Thread starter 3strucking
- Start date
- Joined
- Jan 30, 2017
- Messages
- 261
Got all the grease out and way oil pumped in. Wasnt as bad as I thought it would be.
- Joined
- Dec 9, 2021
- Messages
- 735
Automatic Transmission Fluid (ATF) has a significant amount of detergent in it. It works very well when flushing out grease and contamination. It is very much like Marvel Mystery Oil. A little thicker, and much less expensive.