- Joined
- Jun 22, 2016
- Messages
- 280
I ordered a 7 x 10" adjustable angle plate on eBay from Shars discount site. $120 + 39 UPS came in 3 days. Still in the original Chinese box with the ship date of 8-30-2019. It is pretty heavy 41#! After filing the handle so it would fit and filing all the rough casting edges, it tilts freely & looks good. The inclination scale is suspect but that's not what I would use to set it up any way. The eBay listing said it tilted +45°/-15° which I thought was odd. Turns out it does 45° both ways. The T slots are smaller than my 1/2" set and bigger than my 3/8" set, damn. Will make or buy some 7/16".
I've been wanting an easier way to mount work at an angle. Considered the 5 x 7 ones but my experience with mounting things via T slots has been, I quickly run out of space. All the rest of the eBay listings were in the $270 range.
I've been wanting an easier way to mount work at an angle. Considered the 5 x 7 ones but my experience with mounting things via T slots has been, I quickly run out of space. All the rest of the eBay listings were in the $270 range.