Slotted Angle Plates

Cobra

Active User
H-M Supporter Gold Member
Joined
Apr 24, 2013
Messages
713
Did a small project this week making two pairs of slotted angle plates.
Made them from pieces of mild steel angle. One pair were made from 3X3X1/2 angle and the others from 4X4X1/2 angle.

IMG_0273.JPG IMG_0274.JPG

Facing the outer surfaces.

IMG_0275.JPG IMG_0276.JPG

Facing the edges prior to facing the interior surfaces.
 
Nicely done. I like your work holding methods, especially for the edge facing.

Tom
 
Back
Top