- Joined
- Sep 22, 2010
- Messages
- 7,223
Uploaded videos
1-10 of 255
1-10 of 255
- 8:57antique model METAL SHAPER MODEL Part 2 tubalcainmrpete2221,350 views 20 hours agoTubalcain shows an old machinist (modelmaker) built metal shaper. This is PART 2. This link is an Index of all tubalcain (MrPete222) videos which appear on YOUTUBE. . It i...
- 11:14MACHINE SHOP TIPS #99 Aligning Lathe Centers TEST BAR METHOD tubalcainmrpete2226,055 views 1 week agoTubalcain aligns the centers on an ATLAS lathe using the "test bar method".
- 3:06SOUTH BEND LATHE INSTRUCTIONAL VIDEOS For Sale by tubalcainmrpete2221,716 views 2 weeks agoThese 2 volumes (20 videos total) are loosely based on South Bend's book entitled "HOW TO RUN A LATHE" . These instructional videos are aimed at the beginner or novice.Ide...
- 5:08Machine Shop Tutorial Videos FOR SALE tubalcainmrpete2223,113 views 1 month agoThese videos tips are on 2 flash drives that will load on your USB port. (NOT DVDS) There are 67 videos with a total running time of about 12 hours.
- 22:24MACHINE SHOP TIPS #101 - Ways to Tap a Hole Straight Part B tubalcainmrpete2228,299 views 1 month agoThis link is an Index of Tubal Cain (MrPete222) videos. It is listed at the HOBBY MACHINIST FORUM. http://www.hobby-machinist.com/showthread.php/5185-Index-of-Tubal-Cain-%2...
- 16:36MACHINE SHOP TIPS #100 - Ways to Tap a Hole Straight Part A tubalcainmrpete2229,337 views 1 month agoThis link is an Index of all tubalcain (MrPete222) videos which appear on YOUTUBE. . It is listed at the HOBBY MACHINIST FORUM. http://www.hobby-machinist.com/showthread.ph...
- 4:55ANTIQUE NAVY KOHLER LIGHT PLANT generator tubalcainmrpete2225,100 views 2 months agoTubalcain demonstrates an old KOHLER generator set. 110 volt, DC
- 8:39antique model METAL SHAPER MODEL (like ATLAS) Part 1 tubalcainmrpete2228,128 views 2 months agoTubalcain shows an old machinist (modelmaker) built metal shaper. This link is an Index of all tubalcain (MrPete222) videos which appear on YOUTUBE. . It is listed at the ...
- 36:47MACHINE SHOP TIPS #87 Identifying Metals Pt 3 tubalcainmrpete2221,733 views 2 days agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm This video is the FOURTH in a series of many ...
- 25:34MACHINE SHOP TIPS #86 Identifying Metals Pt 2 tubalcainmrpete2222,887 views 5 days agoThis video is the third in a series of many videos on identifying common metals. Some of these metals are ELEMENTS, but most useful metals are alloys of two or more element...
- 27:58MACHINE SHOP TIPS #85 Identifying Metals Pt 1 tubalcainmrpete2225,089 views 2 weeks agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm This video is the second in a series of many ...
- 7:46MACHINE SHOP TIPS #84 INTRODUCTION to Identifying Metals tubalcainmrpete2223,298 views 2 weeks agoThis video is the first in a series of many videos on identifying common metals. Some of these metals are ELEMENTS, but most useful metals are alloys of two or more element...
- 6:53antique ELGIN TOOL WORKS LATHE Hardinge tubalcainmrpete2226,327 views 2 months agoTubalcain shows off an old Elgin lathe.
- 6:01GRAVELY TRACTOR II tubalcainmrpete2225,509 views 2 months agoTubalcain demonstrates his newly acquired model L Gravely.
- 12:13MACHINE SHOP TIPS #83 Custom Power Feed for Atlas Lathe tubalcainmrpete2227,539 views 2 months agoTubalcain explains why & how he built a variable speed power feed for his Atlas 12" lathe.
- 5:08tubalcain SHOP TIPS videos FOR SALE on Flashdrivemrpete2223,505 views 3 months agotubalcain SHOP TIPS videos FOR SALE on Flashdrive
- 11:07MACH SHOP TIPS #82 tubalcain Bought a used South Bend Lathemrpete22211,229 views 3 months agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Tubalcain bought a used SB lathe. He discusse...
- 3:32tubalcain MACHINE SHOP VIDEOS dvds FOR SALEmrpete2222,621 views 3 months ago
- 11:09MACHINE SHOP TIPS #81 Miller Plasma Cutter tricks part 2 tubalcainmrpete2229,629 views 4 months agoTubalcain shows some tricks & tips with the Miller plasma torch
- 10:15MACHINE SHOP TIPS #80 Miller Plasma Cutter tricks part 1 tubalcainmrpete2227,855 views 4 months agoTubalcain shows some tricks & tips with the Miller plasma torch
- 13:35MACHINE SHOP TIPS #78 Aligning Lathe Centers pt 1 of 2 tubalcainmrpete22212,392 views 4 months agoTubalcain shows how to align the headstock center with the tailstock center. Part 1 of 2
- 14:14MACHINE SHOP TIPS #79 Aligning Lathe Centers pt 2 of 2 tubalcainmrpete22213,296 views 4 months agoTubalcain shows how to align the headstock center with the tailstock center. Part 2 of 2
- 15:50MACHINE SHOP TIPS #77 Cutting a Dovetail on Bridgeport Mill Part 2 of 2 tubalcainmrpete22213,212 views 5 months agoTubalcain shows how to mill a female dovetail. Project---A thread cutting stop for the 9" South bend lathe. Part 2 of 2
- 12:02MACHINE SHOP TIPS #76 Milling a Dovetail on the Bridgeport Part 1 of 2 tubalcainmrpete22210,121 views 5 months agoTubalcain shows how to mill a female dovetail. Project---A thread cutting stop for the 9" South bend lathe. Part 1 of 2 Go to this website, to see several shop projects....
- 18:29MACHINE SHOP TIPS #75 Measuring Dovetails on the ATLAS LATHE tubalcainmrpete22210,615 views 5 months agoTubalcain shows how to measure male & female dovetails on the Atlas lathe.
- 10:44MACHINE SHOP TIPS #74 Turning a Morse Taper Part 2 of 2 tubalcainmrpete22214,444 views 5 months agoTubalcain shows how to machine a #2 Morse taper (both internal & external) on the 12" Atlas/Craftsman lathe using a homemade taper attachment. part 2 of 2.
- 15:50MACHINE SHOP TIPS #73 Turning a Morse Taper Part 1 of 2 tubalcainmrpete22213,474 views 5 months agoTubalcain shows how to machine a #2 Morse taper (both internal & external) on the 12" Atlas/Craftsman lathe using a homemade taper attachment. part 1 of 2.
- 13:41MACHINE SHOP TIPS #72 Atlas Lathe Taper Turning Part 2 of 2 tubalcainmrpete22211,956 views 6 months agoTubalcain shows how to cut tapers on the 12" Atlas/Craftsman lathe using a homemade taper attachment. part 2 of 2.
- 13:20MACHINE SHOP TIPS #71 Atlas Lathe Taper Turning Part 1 of 2 tubalcainmrpete22213,653 views 6 months agoTubalcain shows how to cut tapers on the 12" Atlas/Craftsman lathe using a homemade taper attachment. part 1 of 2.
- 18:33MACHINE SHOP TIPS #70 Atlas Lathe Attachment Part 3 of 3 tubalcainmrpete22212,419 views 7 months agoMACHINE SHOP TIPS #70 Atlas Lathe Milling Attachment Part 3 of 3 tubalcain
- 15:23MACHINE SHOP TIPS #69 Atlas Milling Attachment Part 2 of 3 tubalcainmrpete22210,293 views 7 months agoMACHINE SHOP TIPS #69 Atlas Lathe Milling Attachment Part 2 of 3 tubalcain
- 13:58MACHINE SHOP TIPS #68 Atlas Milling Attachment Part 1 of 3 tubalcainmrpete22214,277 views 7 months agoMACHINE SHOP TIPS #68 Atlas Lathe Milling Attachment Part 1 of 3 tubalcain
- 13:26MACHINE SHOP TIPS #67 Lathe Project Pulley Part 3 of 3 tubalcainmrpete22235,939 views 7 months agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Tubalcain shows how to turn a V-Pulley on the...
- 13:35MACHINE SHOP TIPS #66 Lathe Project Pulley Part 2 of 3 tubalcainmrpete22218,057 views 7 months agoTubalcain shows how to turn a V-Pulley on the Clausing lathe. Part 2 of 3. SUBSCRIBE TO MY CHANNEL!
- 14:34MACHINE SHOP TIPS #65 Lathe Project Pulley Part 1 of 3 tubalcainmrpete22221,517 views 7 months agoTubalcain shows how to turn a V-Pulley on the Clausing lathe. Part 1 of 3. SUBSCRIBE TO MY CHANNEL!
- 12:03MACHINE SHOP TIPS #64 Clausing Lathe Gibs Pt 2 tubalcainmrpete2229,820 views 7 months agoMACHINE SHOP TIPS #64 Clausing Lathe Gibs Pt 2 tubalcain
- 10:45MACHINE SHOP TIPS #63 Clausing Lathe Gibs Pt 1 tubalcainmrpete2227,494 views 7 months agoMACHINE SHOP TIPS #63 Clausing Lathe Gibs Pt 1 tubalcain
- 7:29MACHINE SHOP TIPS #62 Atlas Lathe Gibs Part 2 tubalcainmrpete22210,896 views 8 months agoTubalcain shows how to adjust the compound gibs on the Atlas lathe. Part 2 of 2.
- 10:10MACHINE SHOP TIPS #61 Atlas Lathe Gibs Part 1 tubalcainmrpete2229,467 views 8 months agoTubalcain shows how to adjust the compound gibs on the Atlas lathe. Part 1 of 2.
- 6:38INDEX OF tubalcain MACHINE SHOP VIDEOS nov 2011mrpete2229,786 views 8 months agoThis is an INDEX OF tubalcain MACHINE SHOP VIDEOS as of Nov 2011. Go to this website & you will see the samelist in a printable format. http://neme-s.org/Tubalcain/machi...
- 14:01MACHINE SHOP TIPS #60 Bridgeport Mill Workholding Part 2 of 2 tubalcainmrpete22217,138 views 8 months agoA two part series on holding the work in the Bridgeport mill.
- 11:52MACHINE SHOP TIPS #59 Bridgeport Mill Workholding Part 1 of 2 tubalcainmrpete22210,659 views 8 months agoA two part series on holding the work in the Bridgeport mill.
- 6:12MACHINE SHOP TIPS #58 Bridgeport Mill DRO part 2 tubalcainmrpete2229,386 views 9 months agoPart 2 of 2. Tubalcain verifies the accuracy of the digital readout on the Bridgeport mill.
- 9:09MACHINE SHOP TIPS #57 Bridgeport Mill DRO part 1 tubalcainmrpete22211,360 views 9 months agoPart 1 of 2. Tubalcain verifies the accuracy of the digital readout on the Bridgeport mill.
- 11:15MACHINE SHOP TIPS #56 Hole Layout Pt 2 of 2 tubalcainmrpete22213,363 views 9 months agoTubalcain shows how to accurately layout & ream holes by 3 different methods. part 2 of 2
- 10:44MACHINE SHOP TIPS #55 Hole Layout Pt 1 of 2 tubalcainmrpete22214,266 views 9 months agoTubalcain shows how to accurately layout & ream holes by 3 different methods. part 1 of 2
- 10:29MACHINE SHOP TIPS #54 Buying a Lathe Pt 3 of 3 tubalcainmrpete22220,696 views 9 months agoTubalcain discusses various makes of metal lathes and gives tips on what to watch for when buying a used lathe. Part 3 of 3
- 10:32MACHINE SHOP TIPS #53 Buying a Lathe Pt 2 of 3 tubalcainmrpete22216,322 views 9 months agoTubalcain discusses various makes of metal lathes and gives tips on what to watch for when buying a used lathe. Part 2 of 3
- 10:06MACHINE SHOP TIPS #52 Buying a Lathe Pt 1 of 3 tubalcainmrpete22224,843 views 9 months agoTubalcain discusses various makes of metal lathes and gives tips on what to watch for when buying a used lathe. Part 1 of 3
- 11:25MACHINE SHOP TIPS #51 Lathe Project Plumb Bob Pt 3 of 3 tubalcainmrpete22215,404 views 9 months agoPart 3 of 3 on machining a simple plumb bob on the Clausing Lathe. Includes taper turning by the compound rest method.
- 7:34MACHINE SHOP TIPS #50 Lathe Project Plumb Bob Pt 2 of 3 tubalcainmrpete22215,397 views 9 months agoPart 2 of 3 on machining a simple plumb bob on the Clausing Lathe. Includes taper turning by the compound rest method.
- 10:29MACHINE SHOP TIPS #49 Lathe Project Plumb Bob Pt 1of 3 tubalcainmrpete22212,738 views 9 months agoPart 1 of 3 on machining a simple plumb bob on the Clausing Lathe. Includes taper turning by the compound rest method.
- 3:14ANTIQUE TRACTORS PLOWING Case MM Farmall Cat tubalcainmrpete2226,685 views 10 months agoAn assortment of old tractors plowing at the Geneseo, ILL Steam Show. Sept. 2011
- 1:43ALLIS CHALMERS TRACTORS PLOWING Horses TOO tubalcainmrpete2223,490 views 10 months agoTWO ALLIS CHALMERS TRACTORS PLOWING THE ILLINOIS SOIL. Two teams of horses plowing too.
- 12:46HOME METAL FOUNDRY Casting TOUR tubalcainmrpete22211,112 views 10 months agoTubalcain compares his newly purchased foundry equipment with the old stuff.
- 3:08BEAN HARVEST with Antique Combines JD & Oliver tubalcainmrpete22258,491 views 10 months agoCombining soybeans with old machinery. Older John Deeres & an Oliver. Taped at the Geneseo , Ill. Steam Show. Sept. 2011
- 1:14Plowing with an ARMY JEEP tubalcainmrpete2225,165 views 10 months agoPlowing with an ARMY JEEP at the Geneseo, ILL. STEAM SHOW. Sept. 2011
- 2:342 CYL. JOHN DEERE TRACTORS PLOWING tubalcainmrpete2228,312 views 10 months agoVideo taken at Geneseo, Ill. Steam Show. Sept. 2011
- 1:21JOHN DEERE TRACTOR Running on "Bottle Jacks" tubalcainmrpete2224,523 views 10 months agoJOHN DEERE B TRACTOR Running on COKE Bottles. Video taken at Geneseo, Il steam show.
- 7:44MACHINE SHOP TIPS #37 1/2 Part 4 Parting on the Lathe tubalcainmrpete2228,837 views 11 months agoTubalcain shows how to cut off stock on the Atlas & Clausing lathes. Part 1 of 4. To down load this issue of PM, do a google search for POPULAR MECHANICS November 1944.
- 4:03THRESHING WHEAT with a STEAM ENGINE tubalcainmrpete2223,054 views 11 months agoTHRESHING WHEAT with a STEAM ENGINE and baling the straw with a hit & miss engine. At the Sycamore Steam Show--Aug. 2011.
- 4:06Corn Shelling before Combines tubalcainmrpete2222,620 views 11 months agoCorn Shelling the old fashioned way at the Sycamore Steam Show, Aug 2011.
- 9:11HUGE STEAM ENGINE OPERATING Corliss tubalcainmrpete2225,274 views 11 months agoSeveral steam engines operating under live steam. Also a nice look at the boiler that supplies their steam. The large one features Corliss valves. Filmed at Sycamore Ill. S...
- 3:26Huge FAIRBANKS MORSE Diesel Engine tubalcainmrpete2225,010 views 1 year agoFAIRBANKS MORSE Diesel Engine on permanent display at Freeport, ILL. Steam Show. Search youtube for tubalcain to find all of my 200 videos.
- 4:28THRESHING OATS WITH A 12 HORSE SWEEP tubalcainmrpete2222,335 views 1 year agoTHRESHING OATS WITH A 12 HORSE SWEEP at the steam show. Two teams of mules included.
- 1:49FAIRBANKS MORSE & BESSEMER antique gas engines tubalcainmrpete2223,851 views 1 year agoTwo large antique engines. Details about the engines are on the signs in front of the engines. Pause your video to read. June 2011
- 1:08JOHN DEERE Model W Engine running a corn sheller tubalcainmrpete2223,574 views 1 year agoJOHN DEERE Model W Engine running a corn sheller tubalcain
- 7:47MACHINE SHOP TIPS #48 Lathe Project BEARING Pt 3 tubalcainmrpete22230,346 views 1 year agoPart 3 of 3. Tubalcain shows how to machine a brass bearing on the Clausing lathe.
- 9:51MACHINE SHOP TIPS #47 Lathe Project BEARING Pt 2 tubalcainmrpete22252,046 views 1 year agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Part 2 of 3. Tubalcain shows how to machine a...
- 10:32MACHINE SHOP TIPS #46 Lathe Project BEARING Pt 1 tubalcainmrpete22220,371 views 1 year agoPart 1 of 3. Tubalcain shows how to machine a brass bearing on the Clausing lathe.
- 10:35Machine Shop Tips #45 Part 6 Bandsaw Blades tubalcainmrpete2226,511 views 1 year agoPart 6 of 6. Tubalcain demonstrates the use & care of bandsaw blades.
- 12:34Machine Shop Tips #44 Part 5 Vertical Bandsaw tubalcainmrpete2227,209 views 1 year agoPart 5 of 6. Tubalcain demonstrates the use & care of the vertical bandsaw.
- 9:17Machine Shop Tips #43 Part 4 Vertical Bandsaw tubalcainmrpete2229,024 views 1 year agoPart 4 of 6. Tubalcain demonstrates the use & care of the vertical bandsaw.
- 8:56Machine Shop Tips #42 Part 3 Horizontal Bandsaw tubalcainmrpete2227,612 views 1 year agoPart 3 of 6. Tubalcain demonstrates the use & care of the vertical bandsaw.
- 9:28Machine Shop Tips #41 Part 2 Horizontal Bandsaw tubalcainmrpete2229,161 views 1 year agoPart 2 of 6. Tubalcain demonstrates the use & care of the horizontal (cutoff) bandsaw.
- 8:56Machine Shop Tips #40 Part 1 Horizontal Bandsaw tubalcainmrpete22212,731 views 1 year agoPart 1 of 6. Tubalcain demonstrates the use & care of the horizontal (cutoff) bandsaw.
- 8:05MACHINE SHOP TIPS #34 Turning to a Shoulder on Lathe tubalcainmrpete22216,402 views 1 year agoTubalcain demonstrates how to turn to a square shoulder on the Atlas lathe.
- 9:46ANTIQUE EMMERT PATTERN MAKER'S VISE tubalcainmrpete2226,852 views 1 year agoTubalcain demonstrates the Emmert vise. I believe this to be model K-1. Here is a website that has a type study for these vises. There were apparently many styles & models...
- 6:12Hit & Miss Gas Engine McCormick Deering pt 2 tubalcainmrpete2224,486 views 1 year agoTubalcain demonstrates an antique HIT & MISS GAS ENGINE by McCormick-Deering (model M). Actually, this is a throttle governed engine. A big thanks to Phil for the operating...
- 4:48MACHINE SHOP TIPS #39 Flame Cutting Circles Part 2 tubalcainmrpete22211,526 views 1 year agoTubalcain shows how to flame cut circles with the VICTOR track cutter. Oxy-acetylene cutting torch.
- 5:17MACHINE SHOP TIPS #38 Flame Cutting Straight Part 1 tubalcainmrpete22212,632 views 1 year agoTubalcain shows how to flame cut straight lines with the VICTOR track cutter. Oxy-acetylene cutting torch.
- 6:34MACHINE SHOP TIPS #37 Part 3 Parting on the Lathe tubalcainmrpete22219,894 views 1 year agoTubalcain shows how to cut off stock on the Atlas Clausing lathes. Part 3 of 4
- 7:39MACHINE SHOP TIPS #36 Part 2 Parting on the Lathe tubalcainmrpete22222,905 views 1 year agoTubalcain shows how to cut off stock on the Atlas & Clausing lathes. Part 2 of 4.
- 8:14MACHINE SHOP TIPS #35 Part 1 Parting on the Lathe tubalcainmrpete22240,134 views 1 year agoTubalcain shows how to cut off stock on the Atlas & Clausing lathes. Part 1 of 4.
- 7:44MACHINE SHOP TIPS #33 Turning to Dia. on the Atlas Lathe Part 2 tubalcainmrpete22221,543 views 1 year agoTurning to Diameter on the Atlas Lathe Part 2 of 2.
- 8:44MACHINE SHOP TIPS #32 Turning to Dia. on the Atlas Lathe Part 1 tubalcainmrpete22215,072 views 1 year agoTurning to Diameter on the Atlas Lathe Part 1 of 2.
- 8:58MACHINE SHOP TIPS #31 Facing on the Atlas Lathe Part 2 tubalcainmrpete22216,161 views 1 year agoFacing on the atlas lathe--Part 2 of 2.
- 7:59MACHINE SHOP TIPS #30 Facing on the Atlas Lathe Part 1 tubalcainmrpete22215,137 views 1 year agoFacing on the atlas lathe--Part 1 of 2.
- 7:13MACHINE SHOP TIPS #29 Hardinge Dividing Head Part 2 tubalcainmrpete22223,362 views 1 year agoTubalcain discusses the Hardinge dividing head in a 2 part series.
- 11:45MACHINE SHOP TIPS #28 Hardinge Dividing Head Part 1 tubalcainmrpete22232,659 views 1 year agoTubalcain discusses the Hardinge dividing head in a 2 part series.
- 9:45MACHINE SHOP TIPS #27 Transferring Holes Part 2 tubalcainmrpete22215,551 views 1 year agoTubalcain shows how to transfer holes using transfer punches & transfer screws.
- 9:48MACHINE SHOP TIPS #26 Transferring Holes Part 1 tubalcainmrpete22230,050 views 1 year agoTubalcain shows how to transfer holes using transfer punches & transfer screws.
- 10:46MACHINE SHOP TIPS #24 Acme Threading Part 1 tubalcainmrpete22232,234 views 1 year agoThis is part 1 of a 2 part series on cutting an external acme thread on the Clausing lathe. This part covers tool geometry.
- 13:02MACHINE SHOP TIPS #25 Acme Threading Part 2 tubalcainmrpete22222,701 views 1 year agoThis is part 2 of a 2 part series on cutting an external acme thread on the Clausing lathe.
- 11:44MACHINE SHOP TIPS #23 Internal Threading on the Lathe tubalcainmrpete22261,591 views 1 year agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Tubalcain shows how to cut an internal thread...
- 14:02MACHINE SHOP TIPS #22 Micrometer Quiz Part 2 tubalcainmrpete22217,113 views 1 year agoThis is part 2 of a 2 part video on the micometer. Tubalcain shows the many different types & styles of micrometer calipers. This part has a 20 question QUIZ on reading th...
- 14:02MACHINE SHOP TIPS #21 Micrometers Part 1 tubalcainmrpete22216,073 views 1 year agoThis is part 1 of a 2 part video on measuring. Tubalcain shows the many different types & styles of micrometer calipers. Part 2 will have a QUIZ on reading the micrometer.
- 8:13MACHINE SHOP TIPS #20 Sine Bar (with SPINDLE SQUARE) part 2 tubalcainmrpete22228,586 views 1 year agoThis is part 2 of a 2 part lesson. Tubalcain discusses the SINE BAR and shows some sample uses.
- 13:00MACHINE SHOP TIPS #19 Sine Bar part 1 tubalcainmrpete22222,293 views 1 year agoThis is part 1 of a 2 part lesson. Tubalcain discusses the SINE BAR.
- 9:52MACHINE SHOP TIPS #18 Musing on Lathe Threading tubalcainmrpete22231,788 views 1 year agoTubalcain explains why he sets the compound to 29 degrees for threading. Also how to realign the tool with the work after losing his place.
- 5:45MACHINE SHOP TIPS #17 Threading to Shoulder tubalcainmrpete22222,512 views 1 year agoTubalcain shows how to thread up to the chuck or shoulder the safe way. UPSIDE DOWN. I'm threading white DELRIN plastic to speed things up.
- 9:04MACHINE SHOP TIPS #16 Clausing Lathe LH threading tubalcainmrpete22219,057 views 1 year agoThis is how to cut a LEFT HAND thread on the lathe . I'm using white DELRIN plastic to speed things up.
- 8:10MACHINE SHOP TIPS #15 Bridgeport Mill TRAMMING with SPINDLE SQUARE tubalcainmrpete22225,180 views 1 year agoTubalcain shows how to indicate or tram the bridgeport mill head into perfect squareness with the table. He uses a new instrument called a SPINDLE SQUARE .
- 10:05MACHINE SHOP TIPS #14 BRIDGEPORT MILL Parts (B) tubalcainmrpete22222,552 views 1 year agoTubalcain explains the basic parts of the milling machine. This is part 2 of 2 parts. Changing speeds & the use of the power quill feed are also discussed.
- 10:31MACHINE SHOP TIPS #13 BRIDGEPORT MILL Parts (A) tubalcainmrpete22222,042 views 1 year agoTubalcain explains the basic parts of the milling machine. This is part 1 of 2 parts.
- 9:59MACHINE SHOP TIPS #12 Thread Repair (male) tubalcainmrpete22216,565 views 1 year agoTubalcain demonstrates several methods of repairing minor external thread damage.
- 8:07MACHINE SHOP TIPS #11 Drilling Crossholes tubalcainmrpete22242,775 views 1 year agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Tubalcain shows how to drill crossholes in ro...
- 9:52MACHINE SHOP TIPS #10 Identifying Bolt Threads tubalcainmrpete22215,482 views 1 year agoTubalcain explains how to determine the size & pitch of an unknown thread.
- 9:09MACHINE SHOP TIPS #9 Types of Threads part B tubalcainmrpete22214,894 views 1 year agoTubalcain discusses different types of screw threads. Part 2 of a 2 part video. Be sure & watch Part A
- 6:44MACHINE SHOP TIPS #8 Types of Threads part A tubalcainmrpete22213,083 views 1 year agoTubalcain discusses different types of screw threads. Part 1 of a 2 part video.
- 8:49MACHINE SHOP TIPS #7 Cutting Pipe Threads tubalcainmrpete22222,899 views 1 year agoTubalcain shows how to cut & thread pipe. Old technology--but still useful to some.
- 8:10MACHINE SHOP TIPS #6 Dies/Threading tubalcainmrpete22232,547 views 1 year agoTubalcain talks about dies & threading. This is part 3 of a 3 part series. Threading on the lathe is discussed.
- 9:41MACHINE SHOP TIPS #5 Dies/Threading tubalcainmrpete22214,211 views 1 year agoTubalcain talks about dies & threading. This is part 2 of a 3 part series. Threading by hand in the vise is demonstrated.
- 8:55MACHINE SHOP TIPS #4 Dies/Threading tubalcainmrpete22217,835 views 1 year agoTubalcain talks about dies & threading. This is part 1 of a 3 part series.
- 9:01MINNEAPOLIS MOLINE TRACTOR Part 3 Axle Seal & Bearing Replacementmrpete2225,325 views 1 year agoPart 3 of 3 parts. Tubalcain shows how to fix an oil leak on his Jet Star. New seals & axle bearings are installed. This job is probably the same for models U302, 4 Star, ...
- 9:23MINNEAPOLIS MOLINE TRACTOR Part 2 Axle Seal & Bearing Replacementmrpete2223,023 views 1 year agoPart 2 of 3 parts. Tubalcain shows how to fix an oil leak on his Jet Star. New seals & axle bearings are installed. This job is probably the same for models U302, 4 Star, ...
- 9:27MINNEAPOLIS MOLINE TRACTOR Part 1 Axle Seal & Bearing Replacementmrpete2225,014 views 1 year agoPart 1 of 3 parts. Tubalcain shows how to fix an oil leak on his Jet Star. New seals & axle bearings are installed.
- 9:07MACHINE SHOP TIPS #3 Tapping tubalcainmrpete22238,509 views 1 year agoTubalcain shows how to tap metal on the lathe & drill press
- 9:32MACHINE SHOP TIPS #2 Tapping tubalcainmrpete22217,608 views 1 year agoTubalcain shows how to tap metal using hand taps.
- 10:21MACHINE SHOP TIPS #1 Taps tubalcainmrpete22241,317 views 1 year agoTubalcain talks about TAPS (threading taps).
- 4:54Antique LE ROI GAS ENGINE tubalcainmrpete2224,388 views 1 year agoThis is an Antique LEROI GAS ENGINE, 4 cyl., Wico magneto, electric start, Rockford clutch.
- 9:20Part 2 Prony Brake on HIT & Miss Engine FAIRBANKS MORSEmrpete2229,693 views 2 years agoTubalcain makes a PRONY BRAKE (dynamometer) . He then uses it to determine the horse power of an antique FAIRBANKS MORSE throttle governed engine. This is part 2 of a 2 par...
- 9:40Part 1 Prony Brake on HIT & Miss Engine FAIRBANKS MORSEmrpete22212,886 views 2 years agoTubalcain makes a PRONY BRAKE (dynamometer) . He then uses it to determine the horse power of an antique FAIRBANKS MORSE throttle governed engine. This is part 1 of a 2 par...
- 10:15STEAM ENGINE wobbler-How the Valving Worksmrpete22215,353 views 2 years agoHere's a cutaway teaching aid that I made to help men to understand how the valves work.
- 3:02MINNEAPOLIS MOLINE Tractors PULLINGmrpete2225,444 views 2 years agoseveral different MINNEAPOLIS MOLINE Tractors PULLING at Springfield ILL
- 1:27FAIRBANKS MORSE 25 hp engine like hit & missmrpete2224,403 views 2 years agoFAIRBANKS MORSE 25 hp engine like hit & miss
- 9:02BUILDING A MODEL STEAM ENGINE part 10 tubalcainmrpete22224,018 views 2 years agoThis is part 10 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many...
- 9:19BUILDING A MODEL STEAM ENGINE part 9 tubalcainmrpete22213,430 views 2 years agoThis is part 9 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 9:26BUILDING A MODEL STEAM ENGINE part 8 tubalcainmrpete22217,304 views 2 years agoThis is part 8 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 9:27BUILDING A MODEL STEAM ENGINE part 7 tubalcainmrpete22217,368 views 2 years agoThis is part 7 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 10:14BUILDING A MODEL STEAM ENGINE part 6 tubalcainmrpete22217,110 views 2 years agoThis is part 6 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 9:54BUILDING A MODEL STEAM ENGINE part 5 tubalcainmrpete22216,363 views 2 years agoThis is part 5 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 10:16BUILDING A MODEL STEAM ENGINE part 4 tubalcainmrpete22217,275 views 2 years agoThis is part 4 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 10:06BUILDING A MODEL STEAM ENGINE part 3 tubalcainmrpete22221,191 views 2 years agoThis is part 3 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 10:00BUILDING A MODEL STEAM ENGINE part 2 tubalcainmrpete22227,241 views 2 years agoThis is part 2 of a 10 part series on building a large model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many ...
- 9:07BUILDING A MODEL STEAM ENGINE part 1 tubalcainmrpete22260,205 views 2 years agoThis is part 1 of a 10 part series on building a model OSCILLATING (wobbler) STEAM ENGINE. Pattern making for the cylinder was covered in another video series. Many of the...
- 10:38THE USE & CARE OF REAMERS Part 3 tubalcainmrpete22218,137 views 2 years agoAn introduction to the different types of reamers and their purpose. Reamers are used to size a predrilled hole. They produce a very accurately sized hole. The hole will a...
- 5:20THE USE & CARE OF REAMERS Part 2 tubalcainmrpete22216,291 views 2 years agoAn introduction to the different types of reamers and their purpose. Reamers are used to size a predrilled hole. They produce a very accurately sized hole. The hole will ...
- 8:03THE USE & CARE OF REAMERS Part 1 tubalcainmrpete22228,798 views 2 years agoAn introduction to the different types of reamers and their purpose. Reamers should be stored such that the cuttings edges do not touch one another.
- 9:33TURNING A TAPER ON THE LOGAN LATHE tubalcainmrpete22245,226 views 2 years agoThis is how to taper turn using the COMPOUND REST METHOD.
- 8:01Parts & Operation of the LOGAN LATHEmrpete22230,496 views 2 years agoTHE LOGAN LATHE
- 7:21SPLICING A LEATHER SOUTH BEND LATHE BELT tubalcainmrpete22210,484 views 2 years agoTubalcain shows how to LACE (splice) a lathe belt. He's applying Clipper belt hooks using a vise held belt splicer. Belts for hit & miss engines are also done by this ancie...
- 10:05THE USE & CARE OF DRILL BITS part 3 of 3 Sharpening tubalcainmrpete22280,384 views 2 years agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm This part shows how to sharpen common twist d...
- 9:33THE USE & CARE OF DRILL BITS part 2 of 3 tubalcainmrpete22219,077 views 2 years agoDrill bit geometry. Know all the angles on a twist drill. Part 3 will show how to sharpen bits.
- 8:33THE USE & CARE OF DRILL BITS part 1 of 3 tubalcainmrpete22236,318 views 2 years agoDifferent types of twist drills. Parts of a drill. Part 3 will show how to sharpen bits.
- 10:36FOUNDRY PATTERN MAKING part 6 Steam Engine cores tubalcainmrpete22216,253 views 2 years agoThis is a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cyli...
- 3:39ELMER'S ENGINES #2 steam ring gear tubalcainmrpete22211,861 views 2 years agoHere's another engine made by Cliff. It was given to me by my brother Jan of Cody, WY. Go to this website to look at all of ELMER"S ENGINES plans. Quite an excellent site ...
- 8:54FOUNDRY PATTERN MAKING part 5 Steam Engine metal casting tubalcainmrpete22217,040 views 2 years agoThis will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cy...
- 7:36FOUNDRY PATTERN MAKING part 4 Steam Engine metal casting tubalcainmrpete22219,452 views 2 years agoThis will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cy...
- 3:35ELMER'S ENGINE'S #1 steam MODEL 2 cyl tubalcainmrpete2227,029 views 2 years agoTWO CYLINDER STEAM ENGINE MODEL. Go to this website to look at all of ELMER"S ENGINES plans. Quite an excellent site for yo model engine lovers. http://www.john-tom.com/...
- 9:44FOUNDRY PATTERN MAKING part 3 Steam Engine metal casting tubalcainmrpete22217,554 views 2 years agoThis will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the sand mold. A silica sand core is inserted to produce the cy...
- 9:20FOUNDRY PATTERN MAKING part 2 Steam Engine metal casting tubalcainmrpete22219,279 views 2 years agoThis will be a multi part video on how to make a split foundry pattern . A wooden pattern is used to make an impression in the sand mold. A silica sand core is place in the...
- 8:33FOUNDRY PATTERN MAKING part 1 Steam Engine tubalcainmrpete22226,580 views 2 years agoThis will be a multi part video on foundry pattern making. A wooden pattern is used to make an impression in the mold. A sand core is inserted to produce the cylinder bore ...
- 4:46THREADING Big Holes WITH AN ENCO TAPPING HEAD tubalcainmrpete22210,596 views 2 years agoTubalcain demonstrates big hole threading on the Bridgeport Mill using a ENCO reversing tapping Head.
- 8:445 OSCILLATING Wobbler STEAM ENGINES tubalcainmrpete2222,475 views 2 years agoHere's 5 little steam engines. All made from the same wooden patterns and cast in my garage foundry.
- 8:49THE BRIDGEPORT MILL part 4 Drilling a Bolt Circle tubalcainmrpete22220,439 views 2 years agoThis is part 4 of 4. Be sure and watch the other 3 parts. Tubalcain shows how to accurately drill a 6 hole bolt circle on the Bridgeport milling machine using an ACCURITE d...
- 5:48BORING ON THE BRIDGEPORT MILL part 3 Criterion Head tubalcainmrpete22234,284 views 2 years agoThis part 3 of 4 parts on the Bridgeport. This is how bore A HOLE using the Criterion boring head.
- 7:24BORING ON THE BRIDGEPORT MILL part 2 Criterion Head tubalcainmrpete22251,521 views 2 years agoThis part 2 of 4 parts on the Bridgeport. This is how to use a Criterion boring head.
- 10:01PARTS OF THE CLAUSING METAL LATHE tubalcainmrpete22216,144 views 2 years agoA very basic discussion of the main parts of a CLAUSING 12" Lathe.
- 8:29Bridgeport Mill part1 Indicating a Hole prior to boring tubalcainmrpete22237,231 views 2 years agoTubalcain shows how to indicate (sweep) a hole on the Milling Machine prior to boring. part 2 will deal with enlarging the hole with a boring head. part 3 will cover drilli...
- 8:46LATHE TOOL BIT GRINDING #4 South Bend Clausing loganmrpete22230,205 views 2 years agoTubalcain demonstrates the actual grinding of a lathe tool bit. This the last of 4 videos on the subject.
- 4:025 SMALL OSCILLATING STEAM ENGINE MODELS tubalcainmrpete2224,695 views 2 years agoHere are 5 examples of oscillating steam engines.
- 6:02THREADING WITH A PROCUNIER TAPPING HEAD tubalcainmrpete22210,351 views 2 years agoTubalcain demonstrates hole threading on the WALKER TURNER DRILL PRESS using a Procunier tapping Head.
- 7:02TAILSTOCK ALIGNMENT on LOGAN HARDINGE South Bend Lathes Part 2mrpete22233,291 views 2 years agoTwo methods of aligning the headstock center with the tailstock center. AKA--how to turn stock between centers WITHOUT a taper.
- 7:03TAILSTOCK ALIGNMENT on Clausing Atlas South Bend Lathes Part 1mrpete22234,498 views 2 years agoTwo methods of aligning the headstock center with the tailstock center. AKA--how to turn stock between centers WITHOUT a taper.
- 7:24CRETORS MODEL POPCORN WAGON STEAM ENGINE tubalcainmrpete2227,059 views 2 years agoThis is a model of an early Cretors oscillating steam engine. Most Cretors engines were of the reciprocating type. This is a double acting engine with a 3 1/4" flywheel. T...
- 5:16JENSEN MODEL TOY STEAM ENGINE under power tubalcainmrpete2223,662 views 2 years agoHere's a little Jensen vertical steam engine. Powered by electricity--shown under full steam. These were popular toys for young boys long before TV.
- 7:25TAILSTOCK CHUCKS for the Atlas Clausing South Bend Lathesmrpete2225,681 views 2 years agoHere's an assortment of drill chucks that can be used on small metalworking lathes.
- 5:57TAILSTOCK CENTERS on South Bend Clausing Atlas LATHESmrpete2227,158 views 2 years agoAn explanation on the basics of metal lathe tailstock centers.
- 6:55BROACHING A KEYWAY IN A PULLEY tubalcainmrpete22263,877 views 2 years agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm This is how to broach a key slot (keyway) in...
- 7:42CUTTING A STRAIGHT KEYWAY with BRIDGEPORT MILL tubalcainmrpete22242,827 views 2 years agoThis is how to mill a straight keyway on a shaft using a BRIDGEPORT MILLING MACHINE. Watch my other video that show how to cut a woodruff (half moon) key seat. And yet an...
- 10:17CUTTING A WOODRUFF KEYWAY on the BRIDGEPORT MILLmrpete22218,198 views 2 years agoTubalcain shows how to cut a keyway or keyseat (half moon) type on a milling machine
- 3:24SOLENOID MAGNET ENGINE electric MOTORmrpete22220,887 views 2 years agoThis little reciprocating motor looks something like a steam engine. Fabricated using a commercially made solenoid.
- 3:21Toy VACUUM ROTOR ENGINE atmospheric flame lickermrpete2227,000 views 2 years agoNeed advise in getting this balky old engine running. Made by the VACUUM ROTOR CO in Dayton , Ohio. (circa 1920s).
- 8:09USING THE EDGEFINDER ON THE BRIDGEPORT MILL tubalcainmrpete22228,202 views 2 years agoThis is how to find the edge of your work on a milling machine. You can then accurately locate holes or slots. In effect, your layout work can be done on the machine with ...
- 4:05SCREW BACKLASH on Atlas Clausing Lathe tubalcainmrpete22229,199 views 2 years agoTubalcain explains backlash between screws & nuts as applied to the atlas lathe crossfeed.
- 7:37Three Jaw Chucks on Logan Clausing Hardinge Lathes part 2 tubalcainmrpete22210,341 views 2 years agoThe pros & cons of 3 jaw lathe chucks. How to reverse jaws & how to disassemble. Part2
- 4:33large GYROSCOPE by tubalcainmrpete22219,593 views 2 years agoHere's a big gyroscope that I made just for fun. The wheel is made of zinc and is 5" in dia. and weighs 20 oz. Also equipped with ball bearings.
- 5:25Three Jaw Chucks on Atlas Clausing Hardinge Lathes part 1 tubalcainmrpete22218,635 views 2 years agoThe pros & cons of 3 jaw lathe chucks. How to reverse jaws & how to disassemble.
- 5:10South Bend & Atlas LATHE TOOL HOLDERS tubalcainmrpete22213,509 views 2 years agoTubalcain describes various tool holders for metal lathes. These tool holders can be used on most small lathes, such as--------clausing, atlas, logan, craftsman, south bend...
- 8:15MORSE TAPERS on Atlas & Clausing Lathes tubalcainmrpete22220,520 views 2 years agoA primer on MORSE TAPERS.
- 9:15THREADING on the CLAUSING LATHE atlas logan part 2 tubalcainmrpete22239,670 views 2 years agoTubalcain shows how to thread on the lathe by the single point method.
- 9:56THREADING on the CLAUSING LATHE south bend part 1 tubalcainmrpete22226,855 views 2 years agoTubalcain explains how to set up your lathe for single point threading.
- 6:54GRAVELY TRACTOR 2 Wheel Garden Tractor tubalcainmrpete22219,669 views 2 years agoHere's an old GRAVELY TRACTOR 2 Wheel Garden Tractor. these were popular in the 50's.
- 5:39TOOL BIT GRINDING #3 South Bend Clausing logan Lathe tubalcainmrpete22231,917 views 2 years agoTubalcain explains the angles of a 60 degree tool bit which will be used to cut threads on a lathe. Also covered are several different types of commercial threading tools s...
- 3:18RAY PRICE sings The Last Lettermrpete2229,122 views 2 years agoThe great RAY PRICE sings The Last Letter
- 5:14TOOL BIT GRINDING #2 South Bend Clausing logan Lathe tubalcainmrpete22222,993 views 2 years agoHere's how to grind several different turning tool for your metalworking lathe.
- 10:46TOOL BIT GRINDING #1 South Bend Atlas Lathe tubalcainmrpete22257,195 views 2 years agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Here's how to grind a right hand turning tool...
- 1:35SHELLING CORN with a MINNEAPOLIS MOLINE SHELLER tubalcainmrpete22225,751 views 2 years agoShelling corn the old way. Elevating it into the crib. Taking it out of the crib. Conveying it to the sheller. Shelling it with a MM sheller--powered by a MM tractor. Separ...
- 0:54OLIVER 2 ROW MOUNTED CORN PICKER tubalcainmrpete2228,766 views 2 years agoPicking corn the old way at the Atkinson, Illinois Steam Show.
- 0:49McCormick Tractor WD 9 IH Plowing Farmall -- tubalcainmrpete22228,130 views 2 years agoHere's an old INTERNATIONAL HARVESTER McCormick WD 9 Tractor Plowing at the Atkinson, Illinois Steam Show Sept 2009.
- 1:02JOHN DEERE TRACTORS PLOWING models D & Rmrpete22230,120 views 2 years agoTwo old Johnny Poppers plowing at the 2009 Atkinson, Illinois steam show
- 3:05RAY PRICE sings THE OTHER WOMAN tubalcainmrpete22216,460 views 2 years agoRay Price at his honky tonk best.
- 1:263 MINNEAPOLIS MOLINE TRACTORS PLOWING sept 09mrpete22226,800 views 2 years agoThree old MM tractors plowing at the Atkinson, IL steam show.
- 3:44international harvester IH FARMALL M TRACTORmrpete2223,538 views 2 years agoThe purpose of this video is ti showcase this tractor as it is listed on Ebay. This video will be removed when the tractor is sold.
- 2:32Aultman Taylor Tractor Plowing w/6 bottom tubalcainmrpete222444,183 views 2 years agoHere's an old Aultman Taylor Tractor Plowing w/6 bottom plow. This is a gas or kerosene tractor--not steam. It gets stuck in the rich wet black Illinois soil.
- 1:43Steam Engine Powered ROCK CRUSHER tubalcainmrpete2222,531 views 2 years agoHere's a Steam Engine Powered ROCK CRUSHER. Its probably only about 10% easier this way than using a chain gang.
- 4:50JOHN DEERE TRACTOR roll-o- matic FRONT END TUBALCAINmrpete22285,160 views 2 years agoTubalcain shows the workings and features of the JOHN DEERE TRACTOR roll-o- matic FRONT END .
- 0:51FOOS JR hit & miss gas enginemrpete2222,103 views 2 years agoHere's an antique FOOS JR hit & miss gas engine .
- 0:32antique JOHN DEERE Hit & Miss Gas Enginemrpete2222,816 views 2 years agoantique JOHN DEERE Hit & Miss Gas Engine
- 3:03RAY PRICE sings This cold War With You tubalcainmrpete2224,077 views 2 years agoRAY PRICE sings This cold War With You.
- 4:11HIT & MISS GAS ENGINE McCormick-Deering Part 1 tubalcainmrpete22215,015 views 2 years agoTubalcain demonstrates an antique HIT & MISS GAS ENGINE by McCormick-Deering (model M). Actually, this is a throttle governed engine. A big thanks to Phil for the operating...
- 3:02antique DELCO LIGHT PLANT generator tubalcainmrpete22210,950 views 3 years agoTubalcain is trying to identify the model number for this old DELCO 32 volt light plant. circa 1930s. These generators were used on farms before the REA. Invented by Charle...
- 2:01THIS OLD HOUSE Stuart Hamblen Statler Brothersmrpete22210,034 views 3 years agoVideo taken deep in the piney woods of Northen Wis.
- 5:23JOHN DEERE 2 cyl Tractor Brake Job part 5 tubalcainmrpete2223,978 views 3 years agoTubalcain does a brake job on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A 60 and 620. There are 5 parts to this video.
- 8:16Grinding valves on the CLAUSING LATHE with DUMORE Grinder tubalcainmrpete22217,222 views 3 years agoTubalcain grinds small engine valves on his Clausing lathe using a DUMORE toolpost grinder.
- 5:08JOHN DEERE two cylinder Tractor Brake Job part 4 tubalcainmrpete2225,664 views 3 years agoTubalcain does a brake job on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A 60 and 620. There are 5 parts to this video.
- 6:54JOHN DEERE 630 2 cyl Tractor Brake Job part 3 tubalcainmrpete2224,163 views 3 years agoTubalcain does a brake job on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A 60 and 620. There are 5 parts to this video.
- 6:54JOHN DEERE 630 2 cyl Tractor Brake Job part 3 tubalcainmrpete2224,163 views 3 years agoTubalcain does a brake job on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A 60 and 620. There are 5 parts to this video.
- 5:24JOHN DEERE 2 cyl Tractor Brake Job part 2mrpete2223,914 views 3 years agoTubalcain does a brakejob on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A 60 and 620. There are 5 parts to this vide...
- 4:49JOHN DEERE 2 cyl Tractor Brake Job part 1mrpete2226,261 views 3 years agoTubalcain does a brake job on his old JD 630. This includes relining (riveting) the shoes. This would be much the same on models A, 60, and 620. This procedure is so long t...
- 7:24FOUNDRY WORK casting irregular line parting part 6 video B tubalcainmrpete22229,866 views 3 years agoTubalcain shows how to make sand mold using a pattern with an irregular parting line. This is part B of a two part video.
- 4:24FOUNDRY WORK molding irregular parting line Part 6 video A tubalcainmrpete2227,548 views 3 years agoTubalcain shows how to make sand mold using a pattern with an irregular parting line. This is part A of a two part video. irregular parting part 6 video A
- 2:43HUGE SUN DIAL sundial in Backyardmrpete2221,728 views 3 years agoI built this large sundial in my yard for my grandson.
- 2:27RAY PRICE sings Bright Lights & Blonde Haired Womenmrpete2227,635 views 3 years agoRAY PRICE sings Bright Lights & Blond Haired Women from 1963. Stills from Wisconsin concert 2007.
- 7:18CLAUSING LATHE WORK FARMALL generator commutatormrpete22224,708 views 3 years agoTubalcain turns down the copper commutator from an old tractor generator. Always machine the armature's commutator when replacing the brushes. Starters are built similarly ...
- 7:41BRIDGEPORT MILL indicating the visemrpete22224,607 views 3 years agoTubalcain indicates the vise to true zero. The protractor on the vise's swivel base is only semi-accurate. You need to check it with a dial indicator before each use.
- 4:49FOUNDRY WORK Mold Casting Shakeout part 5 tubalcainmrpete22218,416 views 3 years agoTubalcain breaks open the molds from the last foundry episode.
- 2:43RAY PRICE with Buddy Emmons IF SHE COULD SEE ME NOWmrpete22235,433 views 3 years agoRAY PRICE (from NIGHT LIFE album in 1963) sings IF SHE COULD SEE ME NOW.
- 5:29FOUNDRY WORK Melting & Pouring part 4 tubalcainmrpete22220,758 views 3 years agoToday we pour the sand molds we made last time. Melt the aluminum in my JOHNSON furnace & fill the molds.
- 4:28John Deere B 2 cylinder TRACTOR parade seatmrpete2227,896 views 3 years agoHaving three grand kids has inspired me to build a buddy seat for my JD B tractor. This seat is sometimes called a demonstration seat. Dealers would take a farmer ( who had...
- 7:18FOUNDRY CASTING Molding with a Split Pattern part 3 tubalcainmrpete22226,459 views 3 years agoTubalcain shows how to make a sand mold using a split pattern and containing a core. Cores are used to create a void of a certain shape within a casting. The sand core was...
- 6:50Ray Price sings NIGHT LIFE by Willie Nelsonmrpete22234,679 views 3 years agoThis song is from the original album recorded in 1963. It has the spoken intro by Ray introducing one of the very first country "theme albums". Note that he mentions that t...
- 8:28FOUNDRY CASTING Making a Sand Mold part 2 tubalcain june 09mrpete22244,748 views 3 years agoTubalcain shows how to make a simple sand mold using a flat back pattern. The mold is made in a steel flask using an oil based foundry sand called PETRO-BOND. This is an an...
- 6:48SOUTH BEND LATHE demo on apron parts by TUBALCAINmrpete22225,058 views 3 years agoA discussion on the various parts of a SB lathe apron.
- 6:21FOUNDRY CASTING Making a Sand Mold part 1 TUBALCAINmrpete22237,510 views 3 years agoThis is the first of several FOUNDRY lessons on how to make a sand mold, & then a metal casting.
- 2:46RAY PRICE Girl in the NIGHT Buddy Emmons on steelmrpete22228,484 views 3 years agoRay Price at his honkytonk best. Song written by Hank Thompson. Listen to Buddy Emmon's steel guitar break at 1:17. This song was recorded with his CHEROKEE COWBOYS in the ...
- 2:58RAY PRICE sings Mansion on the Hill by HANK WILLIAMS his roomatemrpete22215,491 views 3 years agoRay closes his show with this encore song written by his friend & room mate in the early 1950's--the great Hank Williams. Concert still photos from 2007 & 2008--taken in Wi...
- 2:46RAY PRICE sings "ENOUGH TO LIE" by TUBALCAINmrpete2222,425 views 3 years agoThe great RAY PRICE sings "ENOUGH TO LIE" from the 60s album TOUCH MY HEART. Still pictures from Ray in concert Fall 2008.
- 8:02BRIDGEPORT MILL Tramming or Indicating the Head to Zeromrpete22257,082 views 3 years agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm Your mill should have its head & spindle loca...
- 6:36BRIDGEPORT MILL J-head How to Change Timing Beltmrpete22213,845 views 3 years agoTubalcain explains how to replace the belt on your Bridgeport milling machine.
- 5:01BRIDGEPORT MILLING MACHINE Removing the Headmrpete22221,036 views 3 years agoTUBALCAIN---Here's how to remove the head from your BRIDGEPORT without your wife's reluctant help. Then You can make your repairs. Watch for my upcoming video on how to ind...
- 3:18RAY PRICE sings "It's Only Love"mrpete22211,598 views 3 years agoAnother (not well known) Ray Price "Tear Jerker". Listen closely to the lyrics.
- 2:09CANCRUSHER smash your budweiser busch miller beer cansmrpete2229,215 views 3 years agoCrush your beer cans at the rate of 60 per minute. Count your fingers before & after each use. Do not operate while drinking!!!!!
- 7:05Principles of STIRLING HOT AIR ENGINES tubalcainmrpete22227,365 views 3 years agoThis is how a stirling engine works.
- 5:37STIRLING HOT AIR ENGINE water cooled TUBALCAINmrpete2224,463 views 3 years agoThis video features 2 stirling engines. They are identical, except that one is air cooled and the other is water cooled (with a water jacket).
- 1:26UFO STRIKES WINDMILL IN ILLINOISmrpete2223,295 views 3 years agoAn UNIDENTIFIED FLYING OBJECT strikes a windmill blade in central ILLINOIS. A timely reminder not to steal the wind from mother nature.
- 2:34STEAM BALL ENGINE Aeolipile HERO of ALEXANDRIAmrpete22210,456 views 3 years agoThe very first steam engine was invented by HERO of Alexandria. This was about 2000 years ago. Because of a lack of materials and machinery at the time, they could find no ...
- 3:35RAY PRICE sings Touch My Heartmrpete22278,905 views 3 years agoCountry music legend RAY PRICE appeared in Wisconsin--Oct 2008.
- 3:51STEAM ENGINE 2 cylinder TUBALCAINmrpete2222,390 views 3 years agoDetails of steam ports are shown on this oscillating engine. Watch for still pictures at the end of the video.
- 2:22FAIRBANKS MORSE MAGNETO DEMONSTRATION Tubalcainmrpete22211,209 views 3 years ago
- 2:12STUART #9 Steam Engine running w/governor TUBALCAINmrpete2227,138 views 3 years agoA STUART TURNER #9 engine from England. Made from fine grained cast iron. I think these casting kits are still available--but not for cheap.
- 6:02OVER & UNDER STIRLING ENGINE hot air Tubalcainmrpete2223,485 views 3 years ago
- 4:25DOUBLE SOLENOID Electric ENGINE Motor Tubalcainmrpete222157,921 views 3 years agoAn electric reciprocating motor driven by 2 solenoids. Powered by a 9.9 volt battery.
- 3:04RAY PRICE sings Walk Me To The Doormrpete22227,336 views 3 years ago
- 6:29STIRLING HOT AIR ENGINE runs on SNOW TUBALCAINmrpete2222,028 views 3 years agoHere's a little commercially made hot air engine. Low temperature differential. Will run on snow or a hot cup of Folgers mountain grown coffee.
- 2:33ELECTRO MAGNET COIL ENGINE (motor) #3 Tubalcainmrpete2227,844 views 3 years agoElectric coil motor, 26 Ga. wire, coils connected in series, 3" flywheel, runs on 9.9 volt Makita battery.
- 2:04WOBBLER STEAM ENGINE OVERHEAD CRANK - TUBALCAINmrpete2224,230 views 3 years agoWOBBLER ENGINE OVERHEAD CRANK --January 2009. DOUBLE ACTING, OSCILLATING. The valves are actually nothing more than ports.
- 1:39EAGLES FEEDING AT STARVED ROCK PARK, ILLINOISmrpete2221,314 views 3 years agoEAGLES FEEDING AT STARVED ROCK PARK, ILLINOIS
- 6:32CASTING COREMAKING foundry & patternmakingmrpete22219,650 views 3 years agoA brief primer on steam engine pattern & core making.
- 5:55ROBINSON HOT AIR stirling ENGINE by TUBALCAINmrpete22210,659 views 3 years agoWe have here a model hot air engine based on the famous ROBINSON patent. Shown running.
- 5:26Hot Air STIRLING ENGINE #2 scotch yoke TUBALCAINmrpete2223,408 views 3 years agoHere's a little hot air engine that uses a SCOTCH YOKE to convert rotary motion to reciprocating motion.
- 2:06ELECTRO MAGNET MOTOR MESCO Avery patent TUBALCAIN 2mrpete22234,049 views 3 years agoHere's a little model engine I built in my home machine shop. I built this with inspiration from the MESCO electric engine that uses the AVERY patent 958,354. Actually, its...
- 0:49LEGO HELICOPTER & ENGINE by Jordanmrpete2221,777 views 3 years agoLego helicopter built by TUBAL CAIN'S grandson (JORDAN).
- 3:44ATLAS LATHE 4-jaw chuck demo TUBALCAINmrpete22275,198 views 3 years agoTo access a complete listing of all my shop videos-- click on this link. http://www.neme-s.org/Tubalcain/machine_shop_tips.htm This is a demo on how to accurately center wo...
- 4:05STEAM ENGINE Locomotive teaching aid demo by TUBALCAINmrpete22214,893 views 3 years agoSTEAM ENGINE Locomotive teaching aid made by WELCH SCIENTIFIC CO. many years ago. See how a steam engine sliding valve works.
- 4:07STIRLING HOT AIR ENGINE #1 by TUBALCAINmrpete2226,220 views 3 years agoSmall home built stirling engine. 3 1/4" hard lead flywheel. Made with aluminum castings. Power piston 3/4" dia., displacer dia. is 7/8". Great running little engine.
- 1:56SOLENOID magnet motor like steam engine TUBALCAINmrpete222100,012 views 3 years agoSOLENOID magnet motor. SPECS: 3" lead flywheel, 3/4" stroke, 7/16" piston (plunger), runs well on 9 volt Makita or 12 volt Dewalt battery, hand wound solenoid 1 1/4" long ...
Last edited by a moderator: