Close up of old bearing in brake bearing cap. I used two pry bars under the edges of this cap and it came right off with the bearing. Easy.
Brake bearing cap after removal. Old bearing still in place. Another edge view but on one of the short sides.
Brake bearing cap after removal. Edge view.
Brake bearing cap after removal. Old bearing still in place. Top view.
Close up of old bearing in brake bearing cap. I used two pry bars under the edges of this cap and it came right off with the bearing. Easy.
Keyway of stationary vari-disc.
This is the stationary vari-disc pulley. Showing the belt side of the pulley.
This is the stationary vari-disc pulley. Showing the brake bearing cap still installed with my old bearing. It's a cheap bearing...replace it now.
expressline99

Close up of old bearing in brake bearing cap. I used two pry bars under the edges of this cap and it came right off with the bearing. Easy.

Media information

Album
Bridgeport Series 1 VS 2hp belt housing tear down and rebuild
Added by
expressline99
Date added
View count
418
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/5.6
Focal length
6.3 mm
Exposure time
1/60 second(s)
ISO
200
Flash
Auto, fired
Filename
DSCN5537.JPG
File size
2.2 MB
Date taken
Fri, 14 April 2017 7:18 PM
Dimensions
3648px x 2736px

Share this media

Back
Top