The trunion can still be made with the original dimensions on the aux base and that end of the trunion, at this point I am not aware of the aux base also having a 3 inch hole already.
Yeah. I milled them together.The trunion can still be made with the original dimensions on the aux base and that end of the trunion, at this point I am not aware of the aux base also having a 3 inch hole already.
Hey guys I just looked back at this thread. In post 63 Lanagos indicates that his trunnion material is 3.25 inches diameter. Does that help us? Like what if we upsize the OD of the trunnion to 3.125 inches so that it can clamp against the 3 inch hole?
The Aux Plate was supposed to be 1/4 thick??Yeah. I milled them together.
However, the aux is just 1/8" plate, and doesn't have a lot of features. Rather trivial to make them again.