- Joined
- Oct 14, 2015
- Messages
- 128
OK, I got the little mill home this weekend, it has some issues with the power feed but I think it could be in the sector handle, works one way but not the other.
Then I took the collect chuck out expecting to find a B&S #9 taper and look what I found. nmtb30 taper collet chuck. Anyone else have anything like this? I seen them reground to R8 but this is an universal collet chuck with zz collets. Any help would be great.
Bill
![IMG_20170304_134924912.jpg IMG_20170304_134924912.jpg](https://www.hobby-machinist.com/data/attachments/185/185336-d139306a6a6fb506004cf4f12ea7d0ea.jpg)
![IMG_20170305_171222686.jpg IMG_20170305_171222686.jpg](https://www.hobby-machinist.com/data/attachments/185/185337-9c7d4edf6222ed19c2f1bd66e71fa753.jpg)
![IMG_20170305_174053538_TOP.jpg IMG_20170305_174053538_TOP.jpg](https://www.hobby-machinist.com/data/attachments/185/185338-1a8decf7d97fe3ede0e5f94b765df0ed.jpg)
![US Burke Mill MV I side view.jpg US Burke Mill MV I side view.jpg](https://www.hobby-machinist.com/data/attachments/185/185339-78a1ec42cc5da4b345dfae722a1645eb.jpg)
![00B0B_lWnVGAFXgjp_600x450.jpg 00B0B_lWnVGAFXgjp_600x450.jpg](https://www.hobby-machinist.com/data/attachments/185/185340-1d7710797271f293c9a472f9d87ffa3d.jpg)
Bill