- Joined
- Jul 20, 2012
- Messages
- 1,241
What is the size of the splinewrench needed to hold the spindle while loosening the drawbar?
28mm?
Where is a source to buy one?
28mm?
Where is a source to buy one?
Thanks for the drawing. With all that it is a nice easy CNC project to draw up and make. Or just be able to bore the hole manually and cut the slots manually.Got mill? Make your own. I made this one for a Grizzly G0755 from 3/8" 6061.View attachment 246271
Thanks for the drawing. With all that it is a nice easy CNC project to draw up and make. Or just be able to bore the hole manually and cut the slots manually.
The Rong Fu 31 has a 28mm spline spindle
It is helpful to add what you know to threads like this because they will be stored for years and searchable. Prior to this thread answering the question with helpful info nothing came up searching for the spline wrench for the machine. Now this will and it will help people all over the web not just this site. And that drawing will be seen and used worldwide.
http://www.grizzly.com/products/Spindle-Spline-Wrench/T26307
Tie a big yellow rope theough the unused end so it gets your attention and you are less likely to get distracted and leave it on the machine.-