- Joined
- Nov 28, 2013
- Messages
- 196
I do a lot of hand reaming of 3d printed holes (Plastic) using standard twist drills. I have the usual set of pin vises for the small ones, but could really use a device which looks like a T-Handle tap wrench but has a jacobs chuck the better to grab drills. It looks like these are available for orthopedic surgeons for many $$$. something which would hold 1/8 to 3/8 would do the job. up to 1/2 inch, too.
I've been using a small Vise-Grip for the larger ones, but this marks up the drill shank and is unwieldy.
Does anyone know if there is such a thing available and if so what is it called and where might I get one.
On the other hand maybe this is a good project to make and come up to speed with the threading adaptor on my new Sherline lathe.
I've been using a small Vise-Grip for the larger ones, but this marks up the drill shank and is unwieldy.
Does anyone know if there is such a thing available and if so what is it called and where might I get one.
On the other hand maybe this is a good project to make and come up to speed with the threading adaptor on my new Sherline lathe.