- Joined
- Jan 8, 2016
- Messages
- 29
I have a Van Norman 1/2 that will no longer move through it's entire x axis range. It moves approximately 6 inches and then binds up tight. Anyone have any insight as to what might be wrong and how to fix it? Since it will not move through it's entire range I do not know how to remove the table to see what might be the problem. The gibs do not seem to be accessible without more table movement either. Other than this problem, its in good shape for its age. I really don't want to scrap it, but but am out of ideas on my own as to how to proceed.
Thanks for any suggestions you might have.
Thanks for any suggestions you might have.