Wondering if any one has any extra sets of vertical band saw guides they would like to part with. Looking for 5/8, 3/4 and 1 in.
Will
Sent from my iPhone using Tapatalk
Will
Sent from my iPhone using Tapatalk
I have some guides dont know what they are from. These are small rectangular blocks with angled ends and a slot cut in the middle. Do you have a pic of what you need?Wondering if any one has any extra sets of vertical band saw guides they would like to part with. Looking for 5/8, 3/4 and 1 in.
Will
Sent from my iPhone using Tapatalk
If you don't find anyone, Do-All still sells them.
That might be for the set of "new from the factory" saw guide assemblies (see parts breakdown below). There's an upper and a lower; this picture might be for my DoAll ML 16" saw. The saw guide assemblies take 4 "saw guide inserts" which are at the top of the parts page. I have full sets of 4 each from 1/16" wide to 1/2"; some of them have two sizes (I recall a set being 1/4" on one side and 5/16" on the other). As an aside, the speedometer for my DoAll ML was discombobulated when I bought the saw. My quote for a new speedo head from DoAll was about $1000. I went with a Hall-effect speed indicator instead for under $20.I was stunned when I priced DoAll blade guides…better be sitting down. I forget the details, but I believe to change blade thickness, there is a whole block that supports the blade guides themselves, and that is different for each size.
I’m kind of making it up now, but it was something like $750 per block.
Can anybody confirm this? You know how people on the internet are.
I have some guides dont know what they are from. These are small rectangular blocks with angled ends and a slot cut in the middle. Do you have a pic of what you need?