- Joined
- Nov 10, 2013
- Messages
- 837
Needed this like a hole in the head but couldn't pass it up!
I really like the t-slots for clamping odd stuff down and the height is low enough to save valuable space under the spindle. The drawback is that it's too heavy for me to lift by myself. Turns smooth as glass though, will need to locate a handle with a 3/8" square hole.
![20160417_171639.jpg 20160417_171639.jpg](https://www.hobby-machinist.com/data/attachments/84/84562-1c5b603b84120ff39b60de524d916516.jpg)
I really like the t-slots for clamping odd stuff down and the height is low enough to save valuable space under the spindle. The drawback is that it's too heavy for me to lift by myself. Turns smooth as glass though, will need to locate a handle with a 3/8" square hole.
![20160417_171626.jpg 20160417_171626.jpg](https://www.hobby-machinist.com/data/attachments/84/84559-271e2de823baab564bece466181b9347.jpg)
![20160417_171802.jpg 20160417_171802.jpg](https://www.hobby-machinist.com/data/attachments/84/84560-0c753c148a9f4b576c54e049a6f869cd.jpg)
![20160417_171652.jpg 20160417_171652.jpg](https://www.hobby-machinist.com/data/attachments/84/84561-d5734a2fa4d7e987a618fb18247201ad.jpg)
![20160417_171639.jpg 20160417_171639.jpg](https://www.hobby-machinist.com/data/attachments/84/84562-1c5b603b84120ff39b60de524d916516.jpg)