I'm working on a basket case LeBlond 13. It was partly disassembled and mixed in with other disassembled machines, motors etc. at an tag Estate sale. Owner had passed away so no info. However, I ended up with just about all of the lathe. I used the "Running a Regal" manual's parts list to get to where I'm at but need the diameter of the pulley at the motor and belt length. I didn't get the original motor or belts so I'm going with a 3ph and a VFD but having the original measurements would be nice. Any help would be much appreciated.
Thanks, Bubba
Including a "Where I started" and "Where I'm at" photos
Thanks, Bubba
Including a "Where I started" and "Where I'm at" photos