- Joined
- Oct 7, 2010
- Messages
- 33
The base is now complete!!
To finish off the base the doors were finished with 3 coats of paint front and back. All the hardware was refinished, except the bolts that hold the side doors... i replace them since the original bolts had been chewed up pretty badly! The star knob on the front door was also refinished. I used my Dremel and sanded it smooth removing all the old grinder and casting marks. It also got a brushed finish to match the other hardware and handles.
I know i kinda glazed over this alittle ... if there are any questions please let me know... my processes usually remain the same as far a refinishing![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
To finish off the base the doors were finished with 3 coats of paint front and back. All the hardware was refinished, except the bolts that hold the side doors... i replace them since the original bolts had been chewed up pretty badly! The star knob on the front door was also refinished. I used my Dremel and sanded it smooth removing all the old grinder and casting marks. It also got a brushed finish to match the other hardware and handles.
I know i kinda glazed over this alittle ... if there are any questions please let me know... my processes usually remain the same as far a refinishing
Last edited by a moderator: