- Joined
- Sep 29, 2017
- Messages
- 2,251
I dont know if this should go on this forum but here goes.
I got this 1Ton arbor press coming mu way,but as you can see it is missing the ram and I must make one.
I know it should be 25mm×25mm,but I do not know the length and what the rack module must be or how to calculate it using the pinion and also of which material and must it be heat treated? Can some help with these questions? I will greatly appreciate it.
Thank you in advance.
Michael.
I got this 1Ton arbor press coming mu way,but as you can see it is missing the ram and I must make one.
I know it should be 25mm×25mm,but I do not know the length and what the rack module must be or how to calculate it using the pinion and also of which material and must it be heat treated? Can some help with these questions? I will greatly appreciate it.
Thank you in advance.
Michael.