- Joined
- Jun 25, 2013
- Messages
- 165
Started on a bushing for my taper cross slide since I got the new nut today.
I love turning brass.
![11-04-13-2.jpg 11-04-13-2.jpg](https://www.hobby-machinist.com/data/attachments/119/119411-1b4097d5619b42d1c7188abeacc540c3.jpg)
I didn't last long as my back said I had enough for today and I need to be up early to go shell more corn so this is as far as I got for tonight.
![11-04-13-3.jpg 11-04-13-3.jpg](https://www.hobby-machinist.com/data/attachments/119/119413-6587bdfee306e22d352190f903bec89b.jpg)
The bushing is for this mounting hole in the cross slide and I still need a screw to tighten the nut down with.
![11-04-13-4.jpg 11-04-13-4.jpg](https://www.hobby-machinist.com/data/attachments/119/119416-8fbbd8abfa8ba4e7cab59d9b1db75bbe.jpg)
I need to clean up the burrs on the nut threads since the person who made it apparently doesn't pay attention to the finer details.......
![11-04-13-2.jpg 11-04-13-2.jpg](https://www.hobby-machinist.com/data/attachments/119/119412-1b4097d5619b42d1c7188abeacc540c3.jpg)
![11-04-13-3.jpg 11-04-13-3.jpg](https://www.hobby-machinist.com/data/attachments/119/119414-6587bdfee306e22d352190f903bec89b.jpg)
![11-04-13-4.jpg 11-04-13-4.jpg](https://www.hobby-machinist.com/data/attachments/119/119415-8fbbd8abfa8ba4e7cab59d9b1db75bbe.jpg)
I love turning brass.
![11-04-13-2.jpg 11-04-13-2.jpg](https://www.hobby-machinist.com/data/attachments/119/119411-1b4097d5619b42d1c7188abeacc540c3.jpg)
I didn't last long as my back said I had enough for today and I need to be up early to go shell more corn so this is as far as I got for tonight.
![11-04-13-3.jpg 11-04-13-3.jpg](https://www.hobby-machinist.com/data/attachments/119/119413-6587bdfee306e22d352190f903bec89b.jpg)
The bushing is for this mounting hole in the cross slide and I still need a screw to tighten the nut down with.
![11-04-13-4.jpg 11-04-13-4.jpg](https://www.hobby-machinist.com/data/attachments/119/119416-8fbbd8abfa8ba4e7cab59d9b1db75bbe.jpg)
I need to clean up the burrs on the nut threads since the person who made it apparently doesn't pay attention to the finer details.......
![11-04-13-2.jpg 11-04-13-2.jpg](https://www.hobby-machinist.com/data/attachments/119/119412-1b4097d5619b42d1c7188abeacc540c3.jpg)
![11-04-13-3.jpg 11-04-13-3.jpg](https://www.hobby-machinist.com/data/attachments/119/119414-6587bdfee306e22d352190f903bec89b.jpg)
![11-04-13-4.jpg 11-04-13-4.jpg](https://www.hobby-machinist.com/data/attachments/119/119415-8fbbd8abfa8ba4e7cab59d9b1db75bbe.jpg)