- Joined
- Mar 29, 2015
- Messages
- 19
Hello Everybody, I have to run my lathe by generator.
Had electrician wire it up and lathe ran for 5 minutes ( smoke everywhere) the 240v coolant transformer fried.
The generator has 5 wires , lathe has 4
am I right in thinking it should be wired L1 to L1, L2 to L2 , L3 to L3 , Neutral not used, Ground to Ground.
Had electrician wire it up and lathe ran for 5 minutes ( smoke everywhere) the 240v coolant transformer fried.
The generator has 5 wires , lathe has 4
am I right in thinking it should be wired L1 to L1, L2 to L2 , L3 to L3 , Neutral not used, Ground to Ground.