- Joined
- Apr 30, 2012
- Messages
- 2,401
Hello Martin
I converted that 9x20 to Centroid Acorn installed a 2hp 3-phase vfd motor and sold it to a friend of mine. Then I converted a 11x26 lathe to Acorn for myself.
Sorry, There were a few drawings of parts but they are now missing. (failed hard drive)
Steve
I converted that 9x20 to Centroid Acorn installed a 2hp 3-phase vfd motor and sold it to a friend of mine. Then I converted a 11x26 lathe to Acorn for myself.
11 x 26 Conversion With Centroid Acorn control and closed loop steppers
my lathe was a Wholesale Tools 11 x 26 very similar to the G0602 Grizzly shown but bigger ( 10x22 ) Another build in pictures. I have been collecting parts for a while now and have finally started to make the required parts to convert my lathe.
www.hobby-machinist.com
Sorry, There were a few drawings of parts but they are now missing. (failed hard drive)
Steve