- Joined
- Jan 22, 2014
- Messages
- 578
I bought a 2" x 2" slab of cast acrylic and cut out some cubes to make some dice. I cut them out on my band saw and trued them up in the lathe. I lapped them with 400 grit and then polished them with my 10" cotton buffing wheel with tripoli compound @ 2400 rpm. They came out super clean & optical clear and throw off some cool optical illusions when you walk around them. I plan to make one a die and other I may make a turner's cube. These are straight forward, one-piece clear cubes with no lamination's (like the pics may infer).