I am back and starting a new project. I am building an EDM machine. I often thought it would be nice to have a version of an Electrical Discharge machine to burn out a broken tap or drill.I did a little research and found there are many "spark eroders" and EDM machines out there that are home built. My research showed me that a decent EDM machine may be worth the investment. Back in the early 80's, I set up and ran a large industrial EDM machine and know what they are capable of doing. In my research, I ran across a couple of books by Ben Fleming on building an EDM. He also has a yahoo group dedicated to building and using an EDM.
While his simpler machine would make an excellent "tap burner" and be a lot less expensive to build, I have opted to build the pulse machine as it is higher quality and more versatile.
So ....... get your popcorn and hang on.
[RSVP=55621]Click here to RSVP[/RSVP]
While his simpler machine would make an excellent "tap burner" and be a lot less expensive to build, I have opted to build the pulse machine as it is higher quality and more versatile.
So ....... get your popcorn and hang on.
[RSVP=55621]Click here to RSVP[/RSVP]