If you have a 40T 8DP Idler gear driving a 48 tooth gear and you want to change the gears before the 40T idler to a 10 or a 14DP gear set!
If you attach, say a 40T 14DP gear to the side of the 40T 8DP, and you keep all the gears before the 40T 8DP gear the same number of teeth but now they are 14DP gears. Will this change the ratio between them because the 40T 14DP gear is smaller than the 40T 8DP gear it is attached to the side of it.
I think it will not because its the same number of teeth on the same axis, but I'm not sure
I want to change this to a smaller DP because i am limited for room to put in my metric transposing gears
If you attach, say a 40T 14DP gear to the side of the 40T 8DP, and you keep all the gears before the 40T 8DP gear the same number of teeth but now they are 14DP gears. Will this change the ratio between them because the 40T 14DP gear is smaller than the 40T 8DP gear it is attached to the side of it.
I think it will not because its the same number of teeth on the same axis, but I'm not sure
I want to change this to a smaller DP because i am limited for room to put in my metric transposing gears