- Joined
- Apr 28, 2016
- Messages
- 24
I just purchased a "new" lathe and could use a bit of help with it. I'm not sure of its model and I'm trying to acquire an operator/service manual without dropping a ton of coin. It fits my bill for vintage but if it's not appropriately place let me know and I'll start a different thread or the mods can move this one.
Anyway it's a Cincinnati Lathe and Tool machine that's pre tray top model. I could find no numbers on it yet but it could use a good cleaning as it sat idle for several years. I plan to put it back into service and could use help and advice on the ID and service of the old beast. I did purchase a Cincinnati brochure off eBay but it doesn't really identify anything. I have some oil on the way so I can change that before it sees power but I'll take any advice I can get at this point. Thanks in advance for any and all help.
Anyway it's a Cincinnati Lathe and Tool machine that's pre tray top model. I could find no numbers on it yet but it could use a good cleaning as it sat idle for several years. I plan to put it back into service and could use help and advice on the ID and service of the old beast. I did purchase a Cincinnati brochure off eBay but it doesn't really identify anything. I have some oil on the way so I can change that before it sees power but I'll take any advice I can get at this point. Thanks in advance for any and all help.
Last edited: