- Joined
- Oct 16, 2019
- Messages
- 6,636
Hi @ycroosh , I have a PM30 style mill inbound. It has a quill DRO and I'm wondering if it's possible to combine that with a column scale to get a total Z axis movement.
I suspect that I won't be able to do this as the quill DRO is this style and likely has iGaging style output as compared to the glass/mag scale outputs.
No biggie if it can't be easily done.![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![Screenshot 2023-04-17 at 12.40.00 PM.png Screenshot 2023-04-17 at 12.40.00 PM.png](https://www.hobby-machinist.com/data/attachments/402/402093-9f1f5053f840d3b26201658c8375f41b.jpg)
I suspect that I won't be able to do this as the quill DRO is this style and likely has iGaging style output as compared to the glass/mag scale outputs.
No biggie if it can't be easily done.
![Screenshot 2023-04-17 at 12.40.00 PM.png Screenshot 2023-04-17 at 12.40.00 PM.png](https://www.hobby-machinist.com/data/attachments/402/402093-9f1f5053f840d3b26201658c8375f41b.jpg)