Here's my milling machine. Kind of bare bones. Came with the Palmgren vise, coolant pump in the base, some R8 collets, a few flycutters and that's about it. Seems to be in decent shape. Table is clean, no holes or gouges (yes, I checked under the vice). The ways are good. It's got the original three phase motor, so I hooked up a VFD and remote machine controls. Great thing about it is it so small, so finding room for it was easy. It goes well with my Heavy 10 (also very small).
![IMG_20151123_085610_394.jpg IMG_20151123_085610_394.jpg](https://www.hobby-machinist.com/data/attachments/84/84379-570605d412bfe836a15aab3ac579693c.jpg)
![IMG_20151123_085543_284.jpg IMG_20151123_085543_284.jpg](https://www.hobby-machinist.com/data/attachments/84/84378-7e8fba6a72822be030991081e4990119.jpg)
![IMG_20151123_085610_394.jpg IMG_20151123_085610_394.jpg](https://www.hobby-machinist.com/data/attachments/84/84379-570605d412bfe836a15aab3ac579693c.jpg)
![IMG_20151123_085543_284.jpg IMG_20151123_085543_284.jpg](https://www.hobby-machinist.com/data/attachments/84/84378-7e8fba6a72822be030991081e4990119.jpg)
Last edited: