Well guys, a couple of days a go I posted a thread looking for information on a horizontal belt sander. I made a mistake in referring to it as an Atlas sander, in fact it is a Delta sander, seems I got the brand mixed up with my lathe. Anyway I need information on the dimensions of the horizontal fence and the hardware to mount the fence. The machine has two fences a horizontal and a cross fence. I am including some pictures of the fences as shown in the literature that comes with the sander. My unit is a 1945 model, however the same sander was made up into the 1960's as the literature I have carries that dating. If I get some dimensions I am sure I can fabricate the fence.
Here are the pictures.
M.L.Woy
Here are the pictures.
M.L.Woy