- Joined
- Sep 23, 2010
- Messages
- 619
My neighbor bought a 1942 2N Ford this winter and someone had brazed a crack in the manifold. So he got out his die grinder and ground the crack almost all the way around and left a hole on the backside. I wanted him to remove the part so i could mig it properly but he resisted. So today i mig welded it up. Considering the rust and the nozzle didn't fit between the motor and manifold i think it turned out pretty good. Crown Alloys 44-30 .035 cast iron mig wire and 75/25 gas...Bob
![projects 029.jpg projects 029.jpg](https://www.hobby-machinist.com/data/attachments/16/16401-d2b03c67108fbf764d59c95ff59f821f.jpg)
![projects 027a.JPG projects 027a.JPG](https://www.hobby-machinist.com/data/attachments/16/16400-90e860d10c3ba42744fac629b7de6619.jpg)
![projects 029.jpg projects 029.jpg](https://www.hobby-machinist.com/data/attachments/16/16401-d2b03c67108fbf764d59c95ff59f821f.jpg)