For my next trick, the 80 total graduations on the crossfeed dial have to go. A single revolution does equal 0.010" so it's high time to regraduate this to the proper 100 graduations. Step 1 is finding a 1/8" set of number stamps in a likable font.
![20191105 01.jpg 20191105 01.jpg](https://www.hobby-machinist.com/data/attachments/262/262541-d1e5638d43ddf623168f30bad2d7f354.jpg)
And, Yes, the trick will be doing this successfully on the 1st try. I'll be using a dividing head if I can work out the setup. It's all new to me (Pretty sure I'll be saying that for years to come).
![20191105 01.jpg 20191105 01.jpg](https://www.hobby-machinist.com/data/attachments/262/262541-d1e5638d43ddf623168f30bad2d7f354.jpg)
And, Yes, the trick will be doing this successfully on the 1st try. I'll be using a dividing head if I can work out the setup. It's all new to me (Pretty sure I'll be saying that for years to come).
Last edited: