- Joined
- Feb 4, 2014
- Messages
- 185
Okay, So I took a cut at 0, 45, and 90, chatter marks every angle, regardless I took everything apart to clean the gibs out and afterwards the problem remains. I also swapped to my brand-new four-jaw chuck to make sure the chuck was not the problem, same results with the four-jaw. I used to get glass-smooth finishes on aluminum with aluminum inserts on my machine...now I get a chattery finish that looks a bit like galvanized metal...
Im trying to keep a Thomas Edison sort of mood going now... "If I find 10,000 ways something won't work, I haven't failed. I am not discouraged, because every wrong attempt discarded is another step forward", Thomas A. Edison, Encyclopaedia Britannica
Im trying to keep a Thomas Edison sort of mood going now... "If I find 10,000 ways something won't work, I haven't failed. I am not discouraged, because every wrong attempt discarded is another step forward", Thomas A. Edison, Encyclopaedia Britannica