Hi all. I have searched and read every thread out there regarding how to wire for-rev switch to a VFD.
I cant get my head around how to.. I want to use my apron microswitches and I need your help.
My vfd is the well known Huanyang thingy. I have attached a photo of the switch and the connector bridge in
the VFD.
I am familiar with programming theses things but this wiring saga puzzles me.
Can someone please help me explain what wire should go where from switch to vfd?
This lathe is a 12x36 as Grizzly, Enco and others sell.
Thanks in advance.
![20170729_163349.jpg 20170729_163349.jpg](https://www.hobby-machinist.com/data/attachments/195/195776-28aa81437c9d98a238744006fe2cd7cb.jpg)
![20170729_163518.jpg 20170729_163518.jpg](https://www.hobby-machinist.com/data/attachments/195/195777-8a192e06d94e5e99f6afcbac0b134bba.jpg)
![20170729_163527.jpg 20170729_163527.jpg](https://www.hobby-machinist.com/data/attachments/195/195778-ecf0cb503cfbe8d7d493e6e2094ed113.jpg)
I cant get my head around how to.. I want to use my apron microswitches and I need your help.
My vfd is the well known Huanyang thingy. I have attached a photo of the switch and the connector bridge in
the VFD.
I am familiar with programming theses things but this wiring saga puzzles me.
Can someone please help me explain what wire should go where from switch to vfd?
This lathe is a 12x36 as Grizzly, Enco and others sell.
Thanks in advance.
![20170729_163349.jpg 20170729_163349.jpg](https://www.hobby-machinist.com/data/attachments/195/195776-28aa81437c9d98a238744006fe2cd7cb.jpg)
![20170729_163518.jpg 20170729_163518.jpg](https://www.hobby-machinist.com/data/attachments/195/195777-8a192e06d94e5e99f6afcbac0b134bba.jpg)
![20170729_163527.jpg 20170729_163527.jpg](https://www.hobby-machinist.com/data/attachments/195/195778-ecf0cb503cfbe8d7d493e6e2094ed113.jpg)