- Joined
- Oct 3, 2017
- Messages
- 4
HI,
I just purchased a HuanYang GT series inverter model GT-7R5G-2, input 1 ph 220 AC, output 3 ph. 220 as a replacement of a 3 KW HuanYang (blowup in smoke) hockup to an air cooled 2.2hp spindle maybe cause I did not have a dust collector .To prevent that it doesn’t append again I have install the vfd in separate room (20 feet away from my cnc) I wonder if I can detach the control panel from the vfd and attach the control panel near the cnc using a box and flat cable. If so does this flat cable has to be lay in a metal conduit my hobby shop is down my basement (wood construction) Thanks
I just purchased a HuanYang GT series inverter model GT-7R5G-2, input 1 ph 220 AC, output 3 ph. 220 as a replacement of a 3 KW HuanYang (blowup in smoke) hockup to an air cooled 2.2hp spindle maybe cause I did not have a dust collector .To prevent that it doesn’t append again I have install the vfd in separate room (20 feet away from my cnc) I wonder if I can detach the control panel from the vfd and attach the control panel near the cnc using a box and flat cable. If so does this flat cable has to be lay in a metal conduit my hobby shop is down my basement (wood construction) Thanks