- Joined
- Dec 18, 2013
- Messages
- 87
I am duplicating this post as I believe this is the proper place for it rather than the original post.
Unfortunately I have run into an issue with the controls. When the start button is pushed the motor will start, run for a few seconds and turn back off. This running period has been getting shorter and shorter.
It is a momentary button push start system with the start button being NO and the stop button being NC.
I *believe* the cause may be a failing relay (M relay on the diagram)
but I have no idea where this little gem is located.
The control circuit is 120v and the power is 220v 3ph.
I know the orange wires go to the start/stop switches. The red/white/black are line 1,2,3.
I am willing and able to provide any additional information as requested.
I am also willing to replace for newer components. This isn't a resto.
Unfortunately I have run into an issue with the controls. When the start button is pushed the motor will start, run for a few seconds and turn back off. This running period has been getting shorter and shorter.
It is a momentary button push start system with the start button being NO and the stop button being NC.
I *believe* the cause may be a failing relay (M relay on the diagram)
but I have no idea where this little gem is located.
The control circuit is 120v and the power is 220v 3ph.
I know the orange wires go to the start/stop switches. The red/white/black are line 1,2,3.
I am willing and able to provide any additional information as requested.
I am also willing to replace for newer components. This isn't a resto.